Tag Archives: air compressor supplier

China Custom Factory Price CE Level Intelligent PLC Control High Quality Professional Electric Motor Powered Direct Screw Air Compressor with ISO supplier

Product Description

BEEST—-AIR COMPRESSOR&SOLUTION

Moair Energy Conservation Durable Two Stage Screw Air Compressor with Double Permanent Magnet Motor

1. Company background

ZheJiang CHINAMFG International Trade Co., Ltd. is the senior partner of HangZhou CHINAMFG Compressor Co., Ltd , we are committed to the sales and after-sales service of air compressors in Southeast Asia, and have stores in Indonesia.
We are the professional manufacturer of the air compressor products of various types including the permanent-magnet synchronous variable-frequency series,permanent-magnet synchronous low-pressure series,permanent-magnet sunchronous two-stage compressors series,etc.
More than 10 years of professional screw compressors manufacturing technology,bringing the international first-class permanent magnet synchronous drive and control technologies.

2. Product introduction

Equipped with an IE3 motor, the direct drive rotary screw air compressor consists of a high-accuracy screw and high-quality casting, with a wide variable range of parameters.

3.Core components

Motor 

  • More stable: no mechanical transmission troubles
    There is no gear shaft in the air compressor and the effective permanent magnet motor and the male rotor are directly connected on 1 shaft without gear drive, which can eliminate pitting of gear or hidden troubles of tooth fracture.
    Without shaft coupling, 2 integrated PM motors directly drive 2 airends of the air compressor, avoiding the hidden troubles of shaft coupling failure.
  • More energy-savings: the airend is always in a smooth running state
    The 2 stage 3 phase permanent magnet rotary gear screw air compressor of CHINAMFG is powered by 2 independent PM motors and 2 independent inverters, which is intelligently controlled such as keep the airend running at a best level-pressure point by controlling discharge pressure and interstage pressure under the circumstance of different rotary speed and different pressure. The best running speed of air compressor can be automatically calculated while running and then the compression ratio can be balanced by final match, which can keep the compressor in a best running state, thus obtaining the highest efficiency.
  • More effective: high-efficiency permanent magnet motor and no gear drive loss.
    With a motor of a high protection degree of IP54, it is more energy-saving and it can stay effective at low frequency and low speed.
  • More environment-friendly operation with lower noise
    No noise of motor bearings, gear meshing and coupling transmission.
  • More structure-compact
    The volume of PM motor is small and the structure is compact, which can save much space.

    4.Parameters

    5.Principle of energy-saving
     

    • Change the traditional induction motor with high-efficiency technology of permanent magnet rotary screw motor, thus reducing the consumption in transmission.
    • Powered by 2 independent PM motors and 2 independent inverters, the compressor is intelligently controlled such as keep the airend running at a best level-pressure point by controlling pressure of air flow and interstage pressure under the circumstance of different rotary speed and different pressure. The best running speed of compressor can be automatically calculated while running and then the compression ratio can be balanced by final match, which can keep the compressor in a best running state, thus obtaining the highest efficiency.
    • Because the gear ratio is fixed, point efficiency is emphasized in this case. That is to say, only with fixed rotary speed and rated pressure did it have the best specific power. When running in a state of variable speed and variable frequency, considering the fixed speed of gear, interstage pressure will not reach the best one. Rotational speed declining while energy consumption not declining at the same time, it is not suitable for running in variable speed and variable frequency state.

       

    /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

    After-sales Service: Online Service
    Warranty: One Year
    Lubrication Style: Lubricated
    Cooling System: Air Cooling
    Power Source: AC Power
    Cylinder Position: Vertical

    air compressor

    What is the impact of humidity on compressed air quality?

    Humidity can have a significant impact on the quality of compressed air. Compressed air systems often draw in ambient air, which contains moisture in the form of water vapor. When this air is compressed, the moisture becomes concentrated, leading to potential issues in the compressed air. Here’s an overview of the impact of humidity on compressed air quality:

    1. Corrosion:

    High humidity in compressed air can contribute to corrosion within the compressed air system. The moisture in the air can react with metal surfaces, leading to rust and corrosion in pipes, tanks, valves, and other components. Corrosion not only weakens the structural integrity of the system but also introduces contaminants into the compressed air, compromising its quality and potentially damaging downstream equipment.

    2. Contaminant Carryover:

    Humidity in compressed air can cause carryover of contaminants. Water droplets formed due to condensation can carry particulates, oil, and other impurities present in the air. These contaminants can then be transported along with the compressed air, leading to fouling of filters, clogging of pipelines, and potential damage to pneumatic tools, machinery, and processes.

    3. Decreased Efficiency of Pneumatic Systems:

    Excessive moisture in compressed air can reduce the efficiency of pneumatic systems. Water droplets can obstruct or block the flow of air, leading to decreased performance of pneumatic tools and equipment. Moisture can also cause problems in control valves, actuators, and other pneumatic devices, affecting their responsiveness and accuracy.

    4. Product Contamination:

    In industries where compressed air comes into direct contact with products or processes, high humidity can result in product contamination. Moisture in compressed air can mix with sensitive products, leading to quality issues, spoilage, or even health hazards in industries such as food and beverage, pharmaceuticals, and electronics manufacturing.

    5. Increased Maintenance Requirements:

    Humidity in compressed air can increase the maintenance requirements of a compressed air system. Moisture can accumulate in filters, separators, and other air treatment components, necessitating frequent replacement or cleaning. Excessive moisture can also lead to the growth of bacteria, fungus, and mold within the system, requiring additional cleaning and maintenance efforts.

    6. Adverse Effects on Instrumentation:

    Humidity can adversely affect instrumentation and control systems that rely on compressed air. Moisture can disrupt the accuracy and reliability of pressure sensors, flow meters, and other pneumatic instruments, leading to incorrect measurements and control signals.

    To mitigate the impact of humidity on compressed air quality, various air treatment equipment is employed, including air dryers, moisture separators, and filters. These devices help remove moisture from the compressed air, ensuring that the air supplied is dry and of high quality for the intended applications.

    air compressor

    Can air compressors be integrated into automated systems?

    Yes, air compressors can be integrated into automated systems, providing a reliable and versatile source of compressed air for various applications. Here’s a detailed explanation of how air compressors can be integrated into automated systems:

    Pneumatic Automation:

    Air compressors are commonly used in pneumatic automation systems, where compressed air is utilized to power and control automated machinery and equipment. Pneumatic systems rely on the controlled release of compressed air to generate linear or rotational motion, actuating valves, cylinders, and other pneumatic components. By integrating an air compressor into the system, a continuous supply of compressed air is available to power the automation process.

    Control and Regulation:

    In automated systems, air compressors are often connected to a control and regulation system to manage the compressed air supply. This system includes components such as pressure regulators, valves, and sensors to monitor and adjust the air pressure, flow, and distribution. The control system ensures that the air compressor operates within the desired parameters and provides the appropriate amount of compressed air to different parts of the automated system as needed.

    Sequential Operations:

    Integration of air compressors into automated systems enables sequential operations to be carried out efficiently. Compressed air can be used to control the timing and sequencing of different pneumatic components, ensuring that the automated system performs tasks in the desired order and with precise timing. This is particularly useful in manufacturing and assembly processes where precise coordination of pneumatic actuators is required.

    Energy Efficiency:

    Air compressors can contribute to energy-efficient automation systems. By incorporating energy-saving features such as Variable Speed Drive (VSD) technology, air compressors can adjust their power output according to the demand, reducing energy consumption during periods of low activity. Additionally, efficient control and regulation systems help optimize the use of compressed air, minimizing waste and improving overall energy efficiency.

    Monitoring and Diagnostics:

    Integration of air compressors into automated systems often includes monitoring and diagnostic capabilities. Sensors and monitoring devices can be installed to collect data on parameters such as air pressure, temperature, and system performance. This information can be used for real-time monitoring, preventive maintenance, and troubleshooting, ensuring the reliable operation of the automated system.

    When integrating air compressors into automated systems, it is crucial to consider factors such as the specific requirements of the automation process, the desired air pressure and volume, and the compatibility of the compressor with the control and regulation system. Consulting with experts in automation and compressed air systems can help in designing an efficient and reliable integration.

    In summary, air compressors can be seamlessly integrated into automated systems, providing the necessary compressed air to power and control pneumatic components, enabling sequential operations, and contributing to energy-efficient automation processes.

    air compressor

    Are there portable air compressors available for home use?

    Yes, there are portable air compressors specifically designed for home use. These portable models offer convenience, versatility, and ease of use for various tasks around the house. Here are some key points about portable air compressors for home use:

    1. Compact and Lightweight: Portable air compressors are typically compact and lightweight, making them easy to transport and store. They are designed with portability in mind, allowing homeowners to move them around the house or take them to different locations as needed.

    2. Electric-Powered: Most portable air compressors for home use are electric-powered. They can be plugged into a standard household electrical outlet, eliminating the need for gasoline or other fuel sources. This makes them suitable for indoor use without concerns about emissions or ventilation.

    3. Versatile Applications: Portable air compressors can be used for a wide range of home applications. They are commonly used for inflating tires, sports equipment, and inflatable toys. They are also handy for operating pneumatic tools such as nail guns, staplers, and paint sprayers. Additionally, portable air compressors can be used for cleaning tasks, powering airbrushes, and other light-duty tasks around the house.

    4. Pressure and Capacity: Portable air compressors for home use typically have lower pressure and capacity ratings compared to larger industrial or commercial models. They are designed to meet the needs of common household tasks rather than heavy-duty applications. The pressure and capacity of these compressors are usually sufficient for most home users.

    5. Oil-Free Operation: Many portable air compressors for home use feature oil-free operation. This means they do not require regular oil changes or maintenance, making them more user-friendly and hassle-free for homeowners.

    6. Noise Level: Portable air compressors designed for home use often prioritize low noise levels. They are engineered to operate quietly, reducing noise disturbances in residential environments.

    7. Cost: Portable air compressors for home use are generally more affordable compared to larger, industrial-grade compressors. They offer a cost-effective solution for homeowners who require occasional or light-duty compressed air applications.

    When considering a portable air compressor for home use, it’s important to assess your specific needs and tasks. Determine the required pressure, capacity, and features that align with your intended applications. Additionally, consider factors such as portability, noise level, and budget to choose a suitable model that meets your requirements.

    Overall, portable air compressors provide a practical and accessible compressed air solution for homeowners, allowing them to tackle a variety of tasks efficiently and conveniently within a home setting.

    China Custom Factory Price CE Level Intelligent PLC Control High Quality Professional Electric Motor Powered Direct Screw Air Compressor with ISO   supplier China Custom Factory Price CE Level Intelligent PLC Control High Quality Professional Electric Motor Powered Direct Screw Air Compressor with ISO   supplier
    editor by CX 2024-05-15

    China supplier 37kw Lubricated CHINAMFG 50HP Two Stage Air CHINAMFG air compressor price

    Product Description

    Product Parameters

    Model Motor Power Maximum Working Pressure Free Air Delivery Air Outlet Pipe Diameter Weight Dimensions(L*W*H)
    kW hp bar(g) psig m³/min cfm kg mm
    BG30APMII 22 30 7 102 4.3 152 G1-1/2″ 650 1500*1000*1350
    8 116 4.1  145
    10 145 3.5  124
    13 189 2.7  95
    BG40APMII 30 40 7 102 6.0  212 G1-1/2″ 700 1500*1000*1350
    8 116 5.9  208
    10 145 4.7  166
    13 189 3.9  138
    BG50APMII 37 50 7 102 7.1  251 G1-1/2″ 750 1500*1000*1350
    8 116 6.9  244
    10 145 5.8  205
    13 189 5.4  191
    BG60APMII 45 60 7 102 10.0  353 G2″ 1250 2100*1300*1650
    8 116 9.5  335
    10 145 7.8  275
    13 189 6.8  240
    BG75APMII 55 75 7 102 13.0  459 G2″ 1300 2100*1300*1650
    8 116 12.5  441
    10 145 9.2  325
    13 189 7.5  265
    BG100APMII 75 100 7 102 15.5  547 G2″ 1350 2100*1300*1650
    8 116 15.2  537
    10 145 12.0  424
    13 189 10.2  360
    BG125APMII 90 125 7 102 19.8  699 DN80 2700 2500*1650*1900
    8 116 19.5  689
    10 145 15.0  530
    13 189 14.0  494
    BG150APMII 110 150 7 102 24.0  848 DN80 2800 2500*1650*1900
    8 116 23.0  812
    10 145 19.2  678
    13 189 16.0  565
    BG180APMII 132 180 7 102 27.5  971 DN80 3000 2500*1650*1900
    8 116 27.0  954
    10 145 23.7  837
    13 189 19.0  671
    BG220APMII 160 220 7 102 33.0  1165 DN80 4300 3000*1900*1950
    8 116 32.5  1148
    10 145 27.5  971
    13 189 22.5  795
    BG250APMII 185 250 7 102 39.0  1377 DN80 4400 3000*1900*1950
    8 116 36.0  1271
    10 145 32.0  1130
    13 189 27.5  971
    BG270APMII 200 270 7 102 43.5  1536 DN80 5000 3600*2200*2200
    8 116 41.0  1448
    10 145 35.5  1254
    13 189 31.5  1112
    BG300APMII 220 300 7 102 51.5  1819 DN100 5500 3600*2200*2200
    8 116 46.0  1624
    10 145 38.5  1360
    13 189 35.5  1254
    BG340APMII 250 340 7 102 54.0  1907 DN100 6000 3600*2200*2200
    8 116 51.0  1801
    10 145 45.0  1589
    13 189 38.0  1342
    BG380APMII 280 380 7 102 60.0  2119 DN125 6800 4000*2300*2300
    8 116 57.0  2013
    10 145 50.0  1766
    13 189 43.0  1519
    BG420APMII 315 420 7 102 65.0  2295 DN125 7000 4000*2300*2300
    8 116 62.0  2190
    10 145 56.0  1978
    13 189 50.5  1783
    BG480APMII 355 480 7 102 75.0  2649 DN150 8500 4200*2200*2350
    8 116 73.0  2578
    10 145 64.0  2260
    13 189 55.0  1942
    BG540APMII 400 540 7 102 84.0  2966 DN150 9000 4200*2200*2350
    8 116 82.0  2896
    10 145 72.0  2543
    13 189 61.0  2154

    Company Profile

    Wallboge is a high-tech enterprise and is considered 1 of the leading manufacturers of air compressor products in China. Our goal is to provide exceptional customer service coupled with quality products and energy saving solutions.

    Wallboge’ s primary businesses focus in following key areas:

    Integrated screw air compressor for laser cutting
    Permanent magnet variable frequency screw air compressor
    Two-stage compression permanent magnet variable frequency screw air compressor
    Low pressure two-stage compression permanent magnet variable frequency screw air compressor
    Low pressure permanent magnet variable frequency screw air compressor
    Water-lubricated oil-free screw air compressor
    Fixed speed screw air compressor
    Oil-free screw blower
    Screw vacuum pump

    At Wallboge, we earn our customers’ trust and satisfaction by manufacturing the superior quality compressed air products for all industries. All of our products are designed for reliable performance, easy maintenance, and maximum energy efficiency. CHINAMFG has been exporting to more than 150 countries across the globe. 

    CHINAMFG continuously innovates product development and management to meet customers’ demand. The powerful enterprise culture and continuous innovation make CHINAMFG improved rapidly. Wallboge’ s vision is to be a world-renowned high-end energy-saving machinery brand, with sustainable development, constantly improving its own value and sharing it with our customers and staff, committed to continuously satisfying the needs of global companies by providing a full range of industrial air compression solutions.

    Certifications

    Exhibitions

     

    After Sales Service

    1. 24/7 after sales service in different languages.
    2. Online instruction for installation and commissioning.
    3. On-site instruction for installation and commissioning provided by well-trained engineers or local authorized service center.
    4. CHINAMFG agents and after sales service available.
     

    Our Advantages

    1. Proven product quality.
    2. Factory direct prices.
    3. On-time delivery.
    4. Prompt technical support in different languages before sales, in sales and after sales.
    5. Small orders accepted to check quality first.
    6. OEM & ODM service available.

     

    FAQ

    Q1: Are you a factory or a trading company? 
    A1: We are a factory. Please check our Company Profile.

    Q2: What is the exact address of your factory? 
    A2: No. 588, East Tonggang Road, Shaxi Town, HangZhou City, ZheJiang Province, China

    Q3: What is your delivery time?
    A3: For standard voltage, the delivery time is 15 working days after you confirm the order. For non-standard voltage, please contact our sales to confirm the delivery time.

    Q4: What kind of payment terms do you accept?
    A4: We accept T/T, L/C at sight.

    Q5: How long is the warranty of your air compressor?
    A5: 2 years for the whole air compressor except consumable spare parts.

    Q6: How long could your air compressor be used?
    A6: Generally, more than 10 years.

    Q7: What is your MOQ requirement?
    A7: 1 unit.

    Q8: Can you offer OEM & ODM service?
    A8: Yes, with a professional design team, we can offer OEM & ODM service.

    /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

    After-sales Service: Engineers Available to Overseas Service.
    Warranty: 2 Years
    Lubrication Style: Lubricated
    Customization:
    Available

    |

    .shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

    Shipping Cost:

    Estimated freight per unit.







    about shipping cost and estimated delivery time.
    Payment Method:







     

    Initial Payment



    Full Payment
    Currency: US$
    Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

    air compressor

    Can air compressors be used for painting and sandblasting?

    Yes, air compressors can be used for both painting and sandblasting applications. Here’s a closer look at how air compressors are utilized for painting and sandblasting:

    Painting:

    Air compressors are commonly used in painting processes, especially in automotive, industrial, and construction applications. Here’s how they are involved:

    • Spray Guns: Air compressors power spray guns used for applying paint coatings. The compressed air atomizes the paint, creating a fine mist that can be evenly sprayed onto surfaces. The pressure and volume of the compressed air impact the spray pattern, coverage, and overall finish quality.
    • Paint Mixers and Agitators: Compressed air is often used to power mixers and agitators that ensure proper blending of paint components. These devices use the compressed air to stir or circulate the paint, preventing settling and maintaining a consistent mixture.
    • Airbrushing: Air compressors are essential for airbrushing techniques, which require precise control over airflow and pressure. Airbrushes are commonly used in artistic applications, such as illustrations, murals, and fine detailing work.

    Sandblasting:

    Air compressors play a crucial role in sandblasting operations, which involve propelling abrasive materials at high velocity to clean, etch, or prepare surfaces. Here’s how air compressors are used in sandblasting:

    • Blasting Cabinets: Air compressors power blasting cabinets or booths, which are enclosed spaces where the sandblasting process takes place. The compressed air propels the abrasive media, such as sand or grit, through a nozzle or gun, creating a forceful stream that impacts the surface being treated.
    • Abrasive Blasting Pots: Air compressors supply air to abrasive blasting pots or tanks that store and pressurize the abrasive media. The compressed air from the compressor enters the pot, pressurizing it and allowing for a controlled release of the abrasive material during the sandblasting process.
    • Air Dryers and Filters: In sandblasting applications, it is crucial to have clean, dry air to prevent moisture and contaminants from affecting the abrasive blasting process and the quality of the surface being treated. Air compressors may be equipped with air dryers and filters to remove moisture, oil, and impurities from the compressed air.

    When using air compressors for painting or sandblasting, it is important to consider factors such as the compressor’s pressure and volume output, the specific requirements of the application, and the type of tools or equipment being used. Consult the manufacturer’s guidelines and recommendations to ensure the air compressor is suitable for the intended painting or sandblasting tasks.

    Proper safety measures, such as wearing protective gear and following established protocols, should always be followed when working with air compressors for painting and sandblasting applications.

    air compressor

    Can air compressors be integrated into automated systems?

    Yes, air compressors can be integrated into automated systems, providing a reliable and versatile source of compressed air for various applications. Here’s a detailed explanation of how air compressors can be integrated into automated systems:

    Pneumatic Automation:

    Air compressors are commonly used in pneumatic automation systems, where compressed air is utilized to power and control automated machinery and equipment. Pneumatic systems rely on the controlled release of compressed air to generate linear or rotational motion, actuating valves, cylinders, and other pneumatic components. By integrating an air compressor into the system, a continuous supply of compressed air is available to power the automation process.

    Control and Regulation:

    In automated systems, air compressors are often connected to a control and regulation system to manage the compressed air supply. This system includes components such as pressure regulators, valves, and sensors to monitor and adjust the air pressure, flow, and distribution. The control system ensures that the air compressor operates within the desired parameters and provides the appropriate amount of compressed air to different parts of the automated system as needed.

    Sequential Operations:

    Integration of air compressors into automated systems enables sequential operations to be carried out efficiently. Compressed air can be used to control the timing and sequencing of different pneumatic components, ensuring that the automated system performs tasks in the desired order and with precise timing. This is particularly useful in manufacturing and assembly processes where precise coordination of pneumatic actuators is required.

    Energy Efficiency:

    Air compressors can contribute to energy-efficient automation systems. By incorporating energy-saving features such as Variable Speed Drive (VSD) technology, air compressors can adjust their power output according to the demand, reducing energy consumption during periods of low activity. Additionally, efficient control and regulation systems help optimize the use of compressed air, minimizing waste and improving overall energy efficiency.

    Monitoring and Diagnostics:

    Integration of air compressors into automated systems often includes monitoring and diagnostic capabilities. Sensors and monitoring devices can be installed to collect data on parameters such as air pressure, temperature, and system performance. This information can be used for real-time monitoring, preventive maintenance, and troubleshooting, ensuring the reliable operation of the automated system.

    When integrating air compressors into automated systems, it is crucial to consider factors such as the specific requirements of the automation process, the desired air pressure and volume, and the compatibility of the compressor with the control and regulation system. Consulting with experts in automation and compressed air systems can help in designing an efficient and reliable integration.

    In summary, air compressors can be seamlessly integrated into automated systems, providing the necessary compressed air to power and control pneumatic components, enabling sequential operations, and contributing to energy-efficient automation processes.

    air compressor

    What is the difference between a piston and rotary screw compressor?

    Piston compressors and rotary screw compressors are two common types of air compressors with distinct differences in their design and operation. Here’s a detailed explanation of the differences between these two compressor types:

    1. Operating Principle:

    • Piston Compressors: Piston compressors, also known as reciprocating compressors, use one or more pistons driven by a crankshaft to compress air. The piston moves up and down within a cylinder, creating a vacuum during the intake stroke and compressing the air during the compression stroke.
    • Rotary Screw Compressors: Rotary screw compressors utilize two intermeshing screws (rotors) to compress air. As the male and female screws rotate, the air is trapped between them and gradually compressed as it moves along the screw threads.

    2. Compression Method:

    • Piston Compressors: Piston compressors achieve compression through a positive displacement process. The air is drawn into the cylinder and compressed as the piston moves back and forth. The compression is intermittent, occurring in discrete cycles.
    • Rotary Screw Compressors: Rotary screw compressors also employ a positive displacement method. The compression is continuous as the rotating screws create a continuous flow of air and compress it gradually as it moves along the screw threads.

    3. Efficiency:

    • Piston Compressors: Piston compressors are known for their high efficiency at lower flow rates and higher pressures. They are well-suited for applications that require intermittent or variable air demand.
    • Rotary Screw Compressors: Rotary screw compressors are highly efficient for continuous operation and are designed to handle higher flow rates. They are often used in applications with a constant or steady air demand.

    4. Noise Level:

    • Piston Compressors: Piston compressors tend to generate more noise during operation due to the reciprocating motion of the pistons and valves.
    • Rotary Screw Compressors: Rotary screw compressors are generally quieter in operation compared to piston compressors. The smooth rotation of the screws contributes to reduced noise levels.

    5. Maintenance:

    • Piston Compressors: Piston compressors typically require more frequent maintenance due to the higher number of moving parts, such as pistons, valves, and rings.
    • Rotary Screw Compressors: Rotary screw compressors have fewer moving parts, resulting in lower maintenance requirements. They often have longer service intervals and can operate continuously for extended periods without significant maintenance.

    6. Size and Portability:

    • Piston Compressors: Piston compressors are available in both smaller portable models and larger stationary units. Portable piston compressors are commonly used in construction, automotive, and DIY applications.
    • Rotary Screw Compressors: Rotary screw compressors are typically larger and more suitable for stationary installations in industrial and commercial settings. They are less commonly used in portable applications.

    These are some of the key differences between piston compressors and rotary screw compressors. The choice between the two depends on factors such as required flow rate, pressure, duty cycle, efficiency, noise level, maintenance needs, and specific application requirements.

    China supplier 37kw Lubricated CHINAMFG 50HP Two Stage Air CHINAMFG   air compressor priceChina supplier 37kw Lubricated CHINAMFG 50HP Two Stage Air CHINAMFG   air compressor price
    editor by CX 2024-05-13

    China OEM Industrial 22kw 30HP 16bar 4 in 1 Oilless Electric Screw Air Compressor with Air Dryer for Laser Cutting Machine supplier

    Product Description

    Industrial 22kw 30HP 16bar 4 in 1 Oilless Electric Screw Air Compressor with Air Dryer for Laser Cutting Machine

    Product Description

    Detailed Photos

    Product Parameters

    22KW-16bar
    Technical Parameters of All-In-One Air screw compressor
    Screw air compressor Power 22kw
    Volume Flow(m³/min) 2.2m³/min
    Pressure (Mpa) 1.58Mpa
    Cooling method Air Cooling
    Start Method Frequency Conversion
    Frequency/voltage 380V/50Hz
    freeze dryer Free Air Deliver 2.6m³/min
    Frequency/voltage 220V/50Hz
    Pressure(Mpa) 1.58Mpa
    Inlet Temperature ≤80ºC
    Ambient Temperature <45ºC
    Pressure Dew-Point  2-10ºC
    Outlet diameter G1
    Fine filter*5 Free Air Deliver 3.0m³
    Pressure ≤2.0Mpa
    Exhaust dust content 0.01um
    Outlet diameter RP3/4
    Air Tank*1 Gas storage tank capacity 350L
    Pressure 1.58Mpa
    Inlet diameter RP3/4
    Outlet diameter RP3/4
    Temperature 150ºC
    Safety valve RC1/2
    Drain valve RC1/2
    size Φ500*1760mm

    Certifications

    Company Profile

    Hansmok air compressor manufacturing factory has been in the business for over 5 years and we take pride in producing high-quality and reliable air com- pressors to meet the diverse needs of our clients. Our manufacturing facility is equipped with the latest technology and state-of-the-art machinery to ensure ef- ficient production processes.

    We specialize in the production of high quality air compressors for various in- dustries such as laser cutting, automotive, manufacturing, and healthcare. Our compressors are known for their durability, energy efficiency, and low mainte- nance costs.

    Our team of skilled engineers and technicians work closely with our clients to understand their specific requirements and design custom-built air compres- sors. We also provide timely after-sales service and support to ensure our cli- ents have a hassle-free experience.

    We are committed to exceeding our clients’ expectations and delivering prod- ucts of the highest quality. With our experience and expertise, we are confident that we can provide the best air compressors for your business needs.

    Packaging & Shipping

    Services

     

     

    FAQ

    Q1: Why customer choose us?
    O: Hansmok is a professional manufacturer for air compressor and after treatment equipment. We have more than 20 years experience in producing and exporting air compressor, air dryer and air filter. 

    Q2: Are you a manufacturer or trading company?
    O: Our factory is located in ZheJiang  China, we have research and develop center, advanced processing equipment, professional technicians, rich experience workers and after-sales team to offer good quality products and good service to our customers. We also can provide you the OEM&ODM service.

    Q3: What’s your delivery time? 
    O: Generally 10 days, if urgently order, pls contact our sales in advance.

    Q4: How long is your air compressor warranty? 
    O: Two year for the whole machine when the compressor leave our factory.

    Q5: How long could your air compressor be used? 
    O: Generally, more than 10 years.

    Q6: What’s payment terms? 
    O: T/T, L/C, Paypal etc. Also we could accept USD, RMB, Euro and other currency (Pls contact our sales for more information.).

    Q7: How about your customer service?
    O: 24 hours on-line service available.

    Q8: How about your after-sales service? 
    O: 1. Provide customers with installation and commissioning online instructions.
    2. Well-trained engineers available to overseas service
    3. World wide agents and after service available

    /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

    After-sales Service: 24 Hours
    Warranty: 2 Years
    Lubrication Style: Oil-less
    Cooling System: Air Cooling
    Power Source: AC Power
    Cylinder Position: Horizontal
    Samples:
    US$ 1930/Piece
    1 Piece(Min.Order)

    |
    Request Sample

    Customization:
    Available

    |

    air compressor

    Can air compressors be used for shipbuilding and maritime applications?

    Air compressors are widely used in shipbuilding and maritime applications for a variety of tasks and operations. The maritime industry relies on compressed air for numerous essential functions. Here’s an overview of how air compressors are employed in shipbuilding and maritime applications:

    1. Pneumatic Tools and Equipment:

    Air compressors are extensively used to power pneumatic tools and equipment in shipbuilding and maritime operations. Pneumatic tools such as impact wrenches, drills, grinders, sanders, and chipping hammers require compressed air to function. The versatility and power provided by compressed air make it an ideal energy source for heavy-duty tasks, maintenance, and construction activities in shipyards and onboard vessels.

    2. Painting and Surface Preparation:

    Air compressors play a crucial role in painting and surface preparation during shipbuilding and maintenance. Compressed air is used to power air spray guns, sandblasting equipment, and other surface preparation tools. Compressed air provides the force necessary for efficient and uniform application of paints, coatings, and protective finishes, ensuring the durability and aesthetics of ship surfaces.

    3. Pneumatic Actuation and Controls:

    Air compressors are employed in pneumatic actuation and control systems onboard ships. Compressed air is used to operate pneumatic valves, actuators, and control devices that regulate the flow of fluids, control propulsion systems, and manage various shipboard processes. Pneumatic control systems offer reliability and safety advantages in maritime applications.

    4. Air Start Systems:

    In large marine engines, air compressors are used in air start systems. Compressed air is utilized to initiate the combustion process in the engine cylinders. The compressed air is injected into the cylinders to turn the engine’s crankshaft, enabling the ignition of fuel and starting the engine. Air start systems are commonly found in ship propulsion systems and power generation plants onboard vessels.

    5. Pneumatic Conveying and Material Handling:

    In shipbuilding and maritime operations, compressed air is used for pneumatic conveying and material handling. Compressed air is utilized to transport bulk materials, such as cement, sand, and grain, through pipelines or hoses. Pneumatic conveying systems enable efficient and controlled transfer of materials, facilitating construction, cargo loading, and unloading processes.

    6. Air Conditioning and Ventilation:

    Air compressors are involved in air conditioning and ventilation systems onboard ships. Compressed air powers air conditioning units, ventilation fans, and blowers, ensuring proper air circulation, cooling, and temperature control in various ship compartments, cabins, and machinery spaces. Compressed air-driven systems contribute to the comfort, safety, and operational efficiency of maritime environments.

    These are just a few examples of how air compressors are utilized in shipbuilding and maritime applications. Compressed air’s versatility, reliability, and convenience make it an indispensable energy source for various tasks and systems in the maritime industry.

    air compressor

    How do you maintain proper air quality in compressed air systems?

    Maintaining proper air quality in compressed air systems is essential to ensure the reliability and performance of pneumatic equipment and the safety of downstream processes. Here are some key steps to maintain air quality:

    1. Air Filtration:

    Install appropriate air filters in the compressed air system to remove contaminants such as dust, dirt, oil, and water. Filters are typically placed at various points in the system, including the compressor intake, aftercoolers, and before point-of-use applications. Regularly inspect and replace filters to ensure their effectiveness.

    2. Moisture Control:

    Excessive moisture in compressed air can cause corrosion, equipment malfunction, and compromised product quality. Use moisture separators or dryers to remove moisture from the compressed air. Refrigerated dryers, desiccant dryers, or membrane dryers are commonly employed to achieve the desired level of dryness.

    3. Oil Removal:

    If the compressed air system utilizes oil-lubricated compressors, it is essential to incorporate proper oil removal mechanisms. This can include coalescing filters or adsorption filters to remove oil aerosols and vapors from the air. Oil-free compressors eliminate the need for oil removal.

    4. Regular Maintenance:

    Perform routine maintenance on the compressed air system, including inspections, cleaning, and servicing of equipment. This helps identify and address any potential issues that may affect air quality, such as leaks, clogged filters, or malfunctioning dryers.

    5. Air Receiver Tank Maintenance:

    Regularly drain and clean the air receiver tank to remove accumulated contaminants, including water and debris. Proper maintenance of the tank helps prevent contamination from being introduced into the compressed air system.

    6. Air Quality Testing:

    Periodically test the quality of the compressed air using appropriate instruments and methods. This can include measuring particle concentration, oil content, dew point, and microbial contamination. Air quality testing provides valuable information about the effectiveness of the filtration and drying processes and helps ensure compliance with industry standards.

    7. Education and Training:

    Educate personnel working with compressed air systems about the importance of air quality and the proper procedures for maintaining it. Provide training on the use and maintenance of filtration and drying equipment, as well as awareness of potential contaminants and their impact on downstream processes.

    8. Documentation and Record-Keeping:

    Maintain accurate records of maintenance activities, including filter replacements, drying system performance, and air quality test results. Documentation helps track the system’s performance over time and provides a reference for troubleshooting or compliance purposes.

    By implementing these practices, compressed air systems can maintain proper air quality, minimize equipment damage, and ensure the integrity of processes that rely on compressed air.

    air compressor

    How is air pressure measured in air compressors?

    Air pressure in air compressors is typically measured using one of two common units: pounds per square inch (PSI) or bar. Here’s a brief explanation of how air pressure is measured in air compressors:

    1. Pounds per Square Inch (PSI): PSI is the most widely used unit of pressure measurement in air compressors, especially in North America. It represents the force exerted by one pound of force over an area of one square inch. Air pressure gauges on air compressors often display pressure readings in PSI, allowing users to monitor and adjust the pressure accordingly.

    2. Bar: Bar is another unit of pressure commonly used in air compressors, particularly in Europe and many other parts of the world. It is a metric unit of pressure equal to 100,000 pascals (Pa). Air compressors may have pressure gauges that display readings in bar, providing an alternative measurement option for users in those regions.

    To measure air pressure in an air compressor, a pressure gauge is typically installed on the compressor’s outlet or receiver tank. The gauge is designed to measure the force exerted by the compressed air and display the reading in the specified unit, such as PSI or bar.

    It’s important to note that the air pressure indicated on the gauge represents the pressure at a specific point in the air compressor system, typically at the outlet or tank. The actual pressure experienced at the point of use may vary due to factors such as pressure drop in the air lines or restrictions caused by fittings and tools.

    When using an air compressor, it is essential to set the pressure to the appropriate level required for the specific application. Different tools and equipment have different pressure requirements, and exceeding the recommended pressure can lead to damage or unsafe operation. Most air compressors allow users to adjust the pressure output using a pressure regulator or similar control mechanism.

    Regular monitoring of the air pressure in an air compressor is crucial to ensure optimal performance, efficiency, and safe operation. By understanding the units of measurement and using pressure gauges appropriately, users can maintain the desired air pressure levels in their air compressor systems.

    China OEM Industrial 22kw 30HP 16bar 4 in 1 Oilless Electric Screw Air Compressor with Air Dryer for Laser Cutting Machine   supplier China OEM Industrial 22kw 30HP 16bar 4 in 1 Oilless Electric Screw Air Compressor with Air Dryer for Laser Cutting Machine   supplier
    editor by CX 2024-05-08

    China supplier Best Selling Medical ICU Ventilator with Advanced Air Compressor Cwh-3020b mini air compressor

    Product Description

    Ventilator CWH-3571B:

    Applied for adult and child
    with high-intelligent control system
    12.1inch touch screen with desirable color schemes
    Multi-mode ventilation function (VCV, SIMV, PSV, PCV, APNEA, CPAP, Manual, SIGH)
    The simplest interface boots a precise control and convenient operation
    Air compressor support(optional)
    Self testing and calibration
    Auto wash for exhaust valve

    Main specifications:

    Power: 220V AC ± 10%, 50 to 60Hz ± 2%, built-in battery for backup
    Gas source: O2, air
    Parameter monitoring: Tidal volume, minute volume, frequency, inhaling time, airway pressure, PEEP and O2 Concentration
    Alarm: No tidal volume, minute volume too high (low), airway pressure too high (low), O2Concentration too high (low), O2; Or air failure, AC power failure and backup battery too low
     

    Applied for adult and child
    Screen Size 12.1 Inch
    Power 220V AC, 50Hz, built-in battery for backup
    Gas source O2, air
    Ventilation mode VCV, SIMV, PSV, PCV, APNEA, CPAP, Manual, SIGH
    Trigger Flow (optional) and pressure trigger
    Waveform display:  Pressure-time, Flowtime, Pressure-volume loop
    Alarm: No tidal volume, minute volume too high (low), airway pressure too high (low), O2Concentration too high (low), O2; Or air failure, AC power failure and backup battery too low
    Parameter monitoring:  Tidal volume, minute volume, frequency, inhaling time, airway pressure, PEEP and O2 Concentration

    /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

    Type: Both Dental, Gynaecology , Orthopedics etc
    Function: Activate Brain Endorphin System
    Theory: Electrotherapeutics
    Certification: CE, ISO13485
    LCD Display: With LCD Display
    Group: Both Adult & Child
    Customization:
    Available

    |

    air compressor

    Can air compressors be used for painting and sandblasting?

    Yes, air compressors can be used for both painting and sandblasting applications. Here’s a closer look at how air compressors are utilized for painting and sandblasting:

    Painting:

    Air compressors are commonly used in painting processes, especially in automotive, industrial, and construction applications. Here’s how they are involved:

    • Spray Guns: Air compressors power spray guns used for applying paint coatings. The compressed air atomizes the paint, creating a fine mist that can be evenly sprayed onto surfaces. The pressure and volume of the compressed air impact the spray pattern, coverage, and overall finish quality.
    • Paint Mixers and Agitators: Compressed air is often used to power mixers and agitators that ensure proper blending of paint components. These devices use the compressed air to stir or circulate the paint, preventing settling and maintaining a consistent mixture.
    • Airbrushing: Air compressors are essential for airbrushing techniques, which require precise control over airflow and pressure. Airbrushes are commonly used in artistic applications, such as illustrations, murals, and fine detailing work.

    Sandblasting:

    Air compressors play a crucial role in sandblasting operations, which involve propelling abrasive materials at high velocity to clean, etch, or prepare surfaces. Here’s how air compressors are used in sandblasting:

    • Blasting Cabinets: Air compressors power blasting cabinets or booths, which are enclosed spaces where the sandblasting process takes place. The compressed air propels the abrasive media, such as sand or grit, through a nozzle or gun, creating a forceful stream that impacts the surface being treated.
    • Abrasive Blasting Pots: Air compressors supply air to abrasive blasting pots or tanks that store and pressurize the abrasive media. The compressed air from the compressor enters the pot, pressurizing it and allowing for a controlled release of the abrasive material during the sandblasting process.
    • Air Dryers and Filters: In sandblasting applications, it is crucial to have clean, dry air to prevent moisture and contaminants from affecting the abrasive blasting process and the quality of the surface being treated. Air compressors may be equipped with air dryers and filters to remove moisture, oil, and impurities from the compressed air.

    When using air compressors for painting or sandblasting, it is important to consider factors such as the compressor’s pressure and volume output, the specific requirements of the application, and the type of tools or equipment being used. Consult the manufacturer’s guidelines and recommendations to ensure the air compressor is suitable for the intended painting or sandblasting tasks.

    Proper safety measures, such as wearing protective gear and following established protocols, should always be followed when working with air compressors for painting and sandblasting applications.

    air compressor

    How are air compressors utilized in pneumatic tools?

    Air compressors play a crucial role in powering and operating pneumatic tools. Here’s a detailed explanation of how air compressors are utilized in pneumatic tools:

    Power Source:

    Pneumatic tools rely on compressed air as their power source. The air compressor generates and stores compressed air, which is then delivered to the pneumatic tool through a hose or piping system. The compressed air provides the force necessary for the tool to perform various tasks.

    Air Pressure Regulation:

    Air compressors are equipped with pressure regulation systems to control the output pressure of the compressed air. Different pneumatic tools require different air pressure levels to operate optimally. The air compressor’s pressure regulator allows users to adjust the output pressure according to the specific requirements of the pneumatic tool being used.

    Air Volume and Flow:

    Air compressors provide a continuous supply of compressed air, ensuring a consistent air volume and flow rate for pneumatic tools. The air volume is typically measured in cubic feet per minute (CFM) and determines the tool’s performance capabilities. Higher CFM ratings indicate that the pneumatic tool can deliver more power and operate at a faster rate.

    Tool Actuation:

    Pneumatic tools utilize compressed air to actuate their mechanical components. For example, an air-powered impact wrench uses compressed air to drive the tool’s internal hammer mechanism, generating high torque for fastening or loosening bolts and nuts. Similarly, air-powered drills, sanders, nail guns, and spray guns rely on compressed air to power their respective operations.

    Versatility:

    One of the significant advantages of pneumatic tools is their versatility, and air compressors enable this flexibility. A single air compressor can power a wide range of pneumatic tools, eliminating the need for separate power sources for each tool. This makes pneumatic tools a popular choice in various industries, such as automotive, construction, manufacturing, and woodworking.

    Portability:

    Air compressors come in different sizes and configurations, offering varying degrees of portability. Smaller portable air compressors are commonly used in applications where mobility is essential, such as construction sites or remote locations. The portability of air compressors allows pneumatic tools to be used in various work environments without the constraints of being tethered to a fixed power source.

    Overall, air compressors are integral to the functionality and operation of pneumatic tools. They provide the necessary power, air pressure regulation, and continuous airflow required for pneumatic tools to perform a wide range of tasks efficiently and effectively.

    air compressor

    Are there air compressors specifically designed for high-pressure applications?

    Yes, there are air compressors specifically designed for high-pressure applications. These compressors are engineered to generate and deliver compressed air at significantly higher pressures than standard air compressors. Here are some key points about high-pressure air compressors:

    1. Pressure Range: High-pressure air compressors are capable of producing compressed air at pressures typically ranging from 1000 to 5000 psi (pounds per square inch) or even higher. This is considerably higher than the typical range of 100 to 175 psi for standard air compressors.

    2. Construction: High-pressure aircompressors feature robust construction and specialized components to withstand the higher pressures involved. They are designed with reinforced cylinders, pistons, valves, and seals that can handle the increased stress and prevent leaks or failures under high-pressure conditions.

    3. Power: Generating high-pressure compressed air requires more power than standard compressors. High-pressure air compressors often have larger motors or engines to provide the necessary power to achieve the desired pressure levels.

    4. Applications: High-pressure air compressors are utilized in various industries and applications where compressed air at elevated pressures is required. Some common applications include:

    • Industrial manufacturing processes that involve high-pressure air for operations such as air tools, pneumatic machinery, and equipment.
    • Gas and oil exploration and production, where high-pressure air is used for well drilling, well stimulation, and enhanced oil recovery techniques.
    • Scuba diving and underwater operations, where high-pressure air is used for breathing apparatus and underwater tools.
    • Aerospace and aviation industries, where high-pressure air is used for aircraft systems, testing, and pressurization.
    • Fire services and firefighting, where high-pressure air compressors are used to fill breathing air tanks for firefighters.

    5. Safety Considerations: Working with high-pressure air requires adherence to strict safety protocols. Proper training, equipment, and maintenance are crucial to ensure the safe operation of high-pressure air compressors. It is important to follow manufacturer guidelines and industry standards for high-pressure applications.

    When selecting a high-pressure air compressor, consider factors such as the desired pressure range, required flow rate, power source availability, and the specific application requirements. Consult with experts or manufacturers specializing in high-pressure compressed air systems to identify the most suitable compressor for your needs.

    High-pressure air compressors offer the capability to meet the demands of specialized applications that require compressed air at elevated pressures. Their robust design and ability to deliver high-pressure air make them essential tools in various industries and sectors.

    China supplier Best Selling Medical ICU Ventilator with Advanced Air Compressor Cwh-3020b   mini air compressorChina supplier Best Selling Medical ICU Ventilator with Advanced Air Compressor Cwh-3020b   mini air compressor
    editor by CX 2024-05-07

    China supplier China Factory Hot Selling S85t 24m3/Min 228kw Stationary Industrial Diesel Engine Screw Air Compressor for Deep Water Well Drilling with Great quality

    Product Description

    Product Description

     

    This series primarily used with water well and geothermal project required drill machine and various other air source requirement.On the premise of adhering to the excellent characteristics of mobile air compressor, the series of products have been upgraded and optimized for the characteristics of continuous use and transportation size requirements.

    Features:

    1. Full series product optimized for stronger frame and better towing protection and safety; stronger roof loading capabilities to meet customer load carry needs with rubber protection strips.

    2. All pressure pipes are connected with steel tubes,it has excellent sealing and protect rubber from prevent aging,never wear and has attractive appearance.

    3. With Patent designed safety air filter unit and stainless steel air inlet pipes for guaranteed dust filter ability and better
    protection against dirty air due to rubber hose damage.

    4. All new designed cooler with independent modular unit and secured by structural component with cushion pad without any pressure points, effectively eliminating cooler damage by shroud deformation;independent damaged unit replacement made easy without removing the cooler assembly.

    5. Diesel portable compressors all with international brand name controller with optimized interface for only 3 switches to
    operate, power, on and off. Automatic preheating, loading and unloading process, pressure control and engine fuel
    injection,eliminating high pressure stop and oil outburst. Controller with water and moisture proof.

    6. Easy access to all maintenance parts with document and tool box for better management of tools, records and safer for machine operation.

    7. Electrical portable machine with breaker and power switch easy to access and protected for convenience and safety.

    8. New designed protected cooler for higher efficiency and better safety protection. Full body sound absorbent cotton and rear car silencer designed to make operate noise reduce 40% less than normal products.

    Product Parameters

     

    Model

    Rated FAD
    (Free Air Delivery)

    Rated pressure

    Power

    Engine brand

    Air End

    S60

    18 m³/min

    18 bar

    162 KW / 190HP

    Yucai

    Single

    S85T

    24m³/min

    22 bar

    228 KW / 310HP

    Yucai

    Two

    S95T

    29m³/min

    24 bar

    295 KW / 400HP

    Yucai

    Two

    S100D

    31m³/min

    25 bar

    309 KW / 420HP

    Xicai

    Two

    S125D

    36m³/min

    30 bar

    410 KW / 558HP

    Cu mmins

    Two

    Detailed Photos

     

    After Sales Service

     

    1.24/7 after sales service support in different languages.
    2.Follow up the feedback of products in 2 months interval by email or call.
    3.Guidance of installation and commissioning on site can be provided by factory-trained technicians or local Authorized Service Center.
    4.Technical training for customers in our partner factory or working site.
    5.Plenty of original spare parts with proven quality are all available from our central stocks.
    6.All kinds of technical documents in different languages.

    FAQ

     

    Q1: Are you factory or trade company?
    A1: We are factory. And we have ourselves trading company.
    Q2: Warranty terms of your machine?
    A2: One year warranty for the machine and technical support according to your needs.
    Q3: Will you provide some spare parts of the machines?
    A3: Yes, of course.
    Q4: What about the voltage of products??Can they be customized?
    A4: Yes, of course. The voltage can be customized according to your equirement.
    Q5: How long will you take to arrange production?
    A5: 380V 50HZ we can delivery the goods within 7-15 days. Other electricity or other color we will delivery within 20-30 days.
    Q6: Can you accept OEM orders?
    A6: Yes, with professional design team, OEM orders are highly welcome.
    Q7 Which trade term can you accept?
     A7: Available trade terms: FOB, CIF, CFR, EXW, CPT, etc.

    /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

    After-sales Service: 24 Hours Online Service
    Warranty: 1 Year
    Lubrication Style: Lubricated
    Cooling System: Air Cooling
    Power Source: Diesel Engine
    Installation Type: Stationary Type

    air compressor

    What are the energy-saving technologies available for air compressors?

    There are several energy-saving technologies available for air compressors that help improve their efficiency and reduce energy consumption. These technologies aim to optimize the operation of air compressors and minimize energy losses. Here are some common energy-saving technologies used:

    1. Variable Speed Drive (VSD) Compressors:

    VSD compressors are designed to adjust the motor speed according to the compressed air demand. By varying the motor speed, these compressors can match the output to the actual air requirement, resulting in energy savings. VSD compressors are particularly effective in applications with varying air demands, as they can operate at lower speeds during periods of lower demand, reducing energy consumption.

    2. Energy-Efficient Motors:

    The use of energy-efficient motors in air compressors can contribute to energy savings. High-efficiency motors, such as those with premium efficiency ratings, are designed to minimize energy losses and operate more efficiently than standard motors. By using energy-efficient motors, air compressors can reduce energy consumption and achieve higher overall system efficiency.

    3. Heat Recovery Systems:

    Air compressors generate a significant amount of heat during operation. Heat recovery systems capture and utilize this wasted heat for other purposes, such as space heating, water heating, or preheating process air or water. By recovering and utilizing the heat, air compressors can provide additional energy savings and improve overall system efficiency.

    4. Air Receiver Tanks:

    Air receiver tanks are used to store compressed air and provide a buffer during periods of fluctuating demand. By using appropriately sized air receiver tanks, the compressed air system can operate more efficiently. The tanks help reduce the number of starts and stops of the air compressor, allowing it to run at full load for longer periods, which is more energy-efficient than frequent cycling.

    5. System Control and Automation:

    Implementing advanced control and automation systems can optimize the operation of air compressors. These systems monitor and adjust the compressed air system based on demand, ensuring that only the required amount of air is produced. By maintaining optimal system pressure, minimizing leaks, and reducing unnecessary air production, control and automation systems help achieve energy savings.

    6. Leak Detection and Repair:

    Air leaks in compressed air systems can lead to significant energy losses. Regular leak detection and repair programs help identify and fix air leaks promptly. By minimizing air leakage, the demand on the air compressor is reduced, resulting in energy savings. Utilizing ultrasonic leak detection devices can help locate and repair leaks more efficiently.

    7. System Optimization and Maintenance:

    Proper system optimization and routine maintenance are essential for energy savings in air compressors. This includes regular cleaning and replacement of air filters, optimizing air pressure settings, ensuring proper lubrication, and conducting preventive maintenance to keep the system running at peak efficiency.

    By implementing these energy-saving technologies and practices, air compressor systems can achieve significant energy efficiency improvements, reduce operational costs, and minimize environmental impact.

    air compressor

    How do you choose the right air compressor for woodworking?

    Choosing the right air compressor for woodworking is essential to ensure efficient and effective operation of pneumatic tools and equipment. Here are some factors to consider when selecting an air compressor for woodworking:

    1. Required Air Volume (CFM):

    Determine the required air volume or cubic feet per minute (CFM) for your woodworking tools and equipment. Different tools have varying CFM requirements, so it is crucial to choose an air compressor that can deliver the required CFM to power your tools effectively. Make sure to consider the highest CFM requirement among the tools you’ll be using simultaneously.

    2. Tank Size:

    Consider the tank size of the air compressor. A larger tank allows for more stored air, which can be beneficial when using tools that require short bursts of high air volume. It helps maintain a consistent air supply and reduces the frequency of the compressor cycling on and off. However, if you have tools with continuous high CFM demands, a larger tank may not be as critical.

    3. Maximum Pressure (PSI):

    Check the maximum pressure (PSI) rating of the air compressor. Woodworking tools typically operate within a specific PSI range, so ensure that the compressor can provide the required pressure. It is advisable to choose an air compressor with a higher maximum PSI rating to accommodate any future tool upgrades or changes in your woodworking needs.

    4. Noise Level:

    Consider the noise level of the air compressor, especially if you’ll be using it in a residential or shared workspace. Some air compressors have noise-reducing features or are designed to operate quietly, making them more suitable for woodworking environments where noise control is important.

    5. Portability:

    Assess the portability requirements of your woodworking projects. If you need to move the air compressor frequently or work in different locations, a portable and lightweight compressor may be preferable. However, if the compressor will remain stationary in a workshop, a larger, stationary model might be more suitable.

    6. Power Source:

    Determine the power source available in your woodworking workspace. Air compressors can be powered by electricity or gasoline engines. If electricity is readily available, an electric compressor may be more convenient and cost-effective. Gasoline-powered compressors offer greater flexibility for remote or outdoor woodworking projects where electricity may not be accessible.

    7. Quality and Reliability:

    Choose an air compressor from a reputable manufacturer known for producing reliable and high-quality equipment. Read customer reviews and consider the warranty and after-sales support offered by the manufacturer to ensure long-term satisfaction and reliability.

    8. Budget:

    Consider your budget and balance it with the features and specifications required for your woodworking needs. While it’s important to invest in a reliable and suitable air compressor, there are options available at various price points to accommodate different budgets.

    By considering these factors and evaluating your specific woodworking requirements, you can choose an air compressor that meets the demands of your tools, provides efficient performance, and enhances your woodworking experience.

    air compressor

    What maintenance is required for air compressors?

    Maintaining air compressors is essential to ensure their optimal performance, longevity, and safe operation. Regular maintenance helps prevent breakdowns, improves efficiency, and reduces the risk of accidents. Here are some key maintenance tasks for air compressors:

    1. Regular Inspection: Perform visual inspections of the air compressor to identify any signs of wear, damage, or leaks. Inspect the compressor, hoses, fittings, and connections for any abnormalities. Pay attention to oil leaks, loose bolts, and worn-out components.

    2. Oil Changes: If your air compressor has an oil lubrication system, regular oil changes are crucial. Follow the manufacturer’s recommendations for the frequency of oil changes and use the recommended oil type. Dirty or degraded oil can impact compressor performance and lead to premature wear.

    3. Air Filter Cleaning or Replacement: Clean or replace the air filter regularly to ensure proper air intake and prevent contaminants from entering the compressor. Clogged or dirty filters can restrict airflow and reduce efficiency.

    4. Drain Moisture: Air compressors produce moisture as a byproduct of the compression process. Accumulated moisture in the tank can lead to rust and corrosion. Drain the moisture regularly from the tank to prevent damage. Some compressors have automatic drains, while others require manual draining.

    5. Belt Inspection and Adjustment: If your compressor has a belt-driven system, inspect the belts for signs of wear, cracks, or tension issues. Adjust or replace the belts as necessary to maintain proper tension and power transmission.

    6. Tank Inspection: Inspect the compressor tank for any signs of corrosion, dents, or structural issues. A damaged tank can be hazardous and should be repaired or replaced promptly.

    7. Valve Maintenance: Check the safety valves, pressure relief valves, and other valves regularly to ensure they are functioning correctly. Test the valves periodically to verify their proper operation.

    8. Motor and Electrical Components: Inspect the motor and electrical components for any signs of damage or overheating. Check electrical connections for tightness and ensure proper grounding.

    9. Keep the Area Clean: Maintain a clean and debris-free area around the compressor. Remove any dirt, dust, or obstructions that can hinder the compressor’s performance or cause overheating.

    10. Follow Manufacturer’s Guidelines: Always refer to the manufacturer’s manual for specific maintenance instructions and recommended service intervals for your air compressor model. They provide valuable information on maintenance tasks, lubrication requirements, and safety precautions.

    Regular maintenance is vital to keep your air compressor in optimal condition and extend its lifespan. It’s also important to note that maintenance requirements may vary depending on the type, size, and usage of the compressor. By following a comprehensive maintenance routine, you can ensure the reliable operation of your air compressor and maximize its efficiency and longevity.

    China supplier China Factory Hot Selling S85t 24m3/Min 228kw Stationary Industrial Diesel Engine Screw Air Compressor for Deep Water Well Drilling   with Great qualityChina supplier China Factory Hot Selling S85t 24m3/Min 228kw Stationary Industrial Diesel Engine Screw Air Compressor for Deep Water Well Drilling   with Great quality
    editor by CX 2024-04-26

    China supplier High Quality for CHINAMFG Engine Air Compressor air compressor portable

    Product Description

    4RT12X air compressor main used on CHINAMFG engine. 

    This is the famous brand engine of China .

    4RT12X air compressor main used on CHINAMFG engine. 

    This is the famous brand engine of China .
    4RT12X air compressor main used on CHINAMFG engine. 

    This is the famous brand engine of China .
    4RT12X air compressor main used on CHINAMFG engine. 

    This is the famous brand engine of China .
    4RT12X air compressor main used on CHINAMFG engine. 

    This is the famous brand engine of China .
    4RT12X air compressor main used on CHINAMFG engine. 

    This is the famous brand engine of China .

      /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

    After-sales Service: 24 Hours Every Day of Technology and Parts Service
    Warranty: 12 Months
    Type: Screw, Spare Parts for Wheel Loader
    Application: Back Pressure Type, Wheel Loader
    Certification: CE, ISO9001: 2000
    Condition: New
    Customization:
    Available

    |

    air compressor

    Can air compressors be used for painting and sandblasting?

    Yes, air compressors can be used for both painting and sandblasting applications. Here’s a closer look at how air compressors are utilized for painting and sandblasting:

    Painting:

    Air compressors are commonly used in painting processes, especially in automotive, industrial, and construction applications. Here’s how they are involved:

    • Spray Guns: Air compressors power spray guns used for applying paint coatings. The compressed air atomizes the paint, creating a fine mist that can be evenly sprayed onto surfaces. The pressure and volume of the compressed air impact the spray pattern, coverage, and overall finish quality.
    • Paint Mixers and Agitators: Compressed air is often used to power mixers and agitators that ensure proper blending of paint components. These devices use the compressed air to stir or circulate the paint, preventing settling and maintaining a consistent mixture.
    • Airbrushing: Air compressors are essential for airbrushing techniques, which require precise control over airflow and pressure. Airbrushes are commonly used in artistic applications, such as illustrations, murals, and fine detailing work.

    Sandblasting:

    Air compressors play a crucial role in sandblasting operations, which involve propelling abrasive materials at high velocity to clean, etch, or prepare surfaces. Here’s how air compressors are used in sandblasting:

    • Blasting Cabinets: Air compressors power blasting cabinets or booths, which are enclosed spaces where the sandblasting process takes place. The compressed air propels the abrasive media, such as sand or grit, through a nozzle or gun, creating a forceful stream that impacts the surface being treated.
    • Abrasive Blasting Pots: Air compressors supply air to abrasive blasting pots or tanks that store and pressurize the abrasive media. The compressed air from the compressor enters the pot, pressurizing it and allowing for a controlled release of the abrasive material during the sandblasting process.
    • Air Dryers and Filters: In sandblasting applications, it is crucial to have clean, dry air to prevent moisture and contaminants from affecting the abrasive blasting process and the quality of the surface being treated. Air compressors may be equipped with air dryers and filters to remove moisture, oil, and impurities from the compressed air.

    When using air compressors for painting or sandblasting, it is important to consider factors such as the compressor’s pressure and volume output, the specific requirements of the application, and the type of tools or equipment being used. Consult the manufacturer’s guidelines and recommendations to ensure the air compressor is suitable for the intended painting or sandblasting tasks.

    Proper safety measures, such as wearing protective gear and following established protocols, should always be followed when working with air compressors for painting and sandblasting applications.

    air compressor

    What are the environmental considerations when using air compressors?

    When using air compressors, there are several environmental considerations to keep in mind. Here’s an in-depth look at some of the key factors:

    Energy Efficiency:

    Energy efficiency is a crucial environmental consideration when using air compressors. Compressing air requires a significant amount of energy, and inefficient compressors can consume excessive power, leading to higher energy consumption and increased greenhouse gas emissions. It is important to choose energy-efficient air compressors that incorporate features such as Variable Speed Drive (VSD) technology and efficient motor design, as they can help minimize energy waste and reduce the carbon footprint.

    Air Leakage:

    Air leakage is a common issue in compressed air systems and can contribute to energy waste and environmental impact. Leaks in the system result in the continuous release of compressed air, requiring the compressor to work harder and consume more energy to maintain the desired pressure. Regular inspection and maintenance of the compressed air system to detect and repair leaks can help reduce air loss and improve overall energy efficiency.

    Noise Pollution:

    Air compressors can generate significant noise levels during operation, which can contribute to noise pollution. Prolonged exposure to high noise levels can have detrimental effects on human health and well-being and can also impact the surrounding environment and wildlife. It is important to consider noise reduction measures such as sound insulation, proper equipment placement, and using quieter compressor models to mitigate the impact of noise pollution.

    Emissions:

    While air compressors do not directly emit pollutants, the electricity or fuel used to power them can have an environmental impact. If the electricity is generated from fossil fuels, the associated emissions from power plants contribute to air pollution and greenhouse gas emissions. Choosing energy sources with lower emissions, such as renewable energy, can help reduce the environmental impact of operating air compressors.

    Proper Waste Management:

    Proper waste management is essential when using air compressors. This includes the appropriate disposal of compressor lubricants, filters, and other maintenance-related materials. It is important to follow local regulations and guidelines for waste disposal to prevent contamination of soil, water, or air and minimize the environmental impact.

    Sustainable Practices:

    Adopting sustainable practices can further reduce the environmental impact of using air compressors. This can include implementing preventive maintenance programs to optimize performance, reducing idle time, and promoting responsible use of compressed air by avoiding overpressurization and optimizing system design.

    By considering these environmental factors and taking appropriate measures, it is possible to minimize the environmental impact associated with the use of air compressors. Choosing energy-efficient models, addressing air leaks, managing waste properly, and adopting sustainable practices can contribute to a more environmentally friendly operation.

    air compressor

    What is the role of air compressor tanks?

    Air compressor tanks, also known as receiver tanks or air receivers, play a crucial role in the operation of air compressor systems. They serve several important functions:

    1. Storage and Pressure Regulation: The primary role of an air compressor tank is to store compressed air. As the compressor pumps air into the tank, it accumulates and pressurizes the air. The tank acts as a reservoir, allowing the compressor to operate intermittently while providing a steady supply of compressed air during periods of high demand. It helps regulate and stabilize the pressure in the system, reducing pressure fluctuations and ensuring a consistent supply of air.

    2. Condensation and Moisture Separation: Compressed air contains moisture, which can condense as the air cools down inside the tank. Air compressor tanks are equipped with moisture separators or drain valves to collect and remove this condensed moisture. The tank provides a space for the moisture to settle, allowing it to be drained out periodically. This helps prevent moisture-related issues such as corrosion, contamination, and damage to downstream equipment.

    3. Heat Dissipation: During compression, air temperature increases. The air compressor tank provides a larger surface area for the compressed air to cool down and dissipate heat. This helps prevent overheating of the compressor and ensures efficient operation.

    4. Pressure Surge Mitigation: Air compressor tanks act as buffers to absorb pressure surges or pulsations that may occur during compressor operation. These surges can be caused by variations in demand, sudden changes in airflow, or the cyclic nature of reciprocating compressors. The tank absorbs these pressure fluctuations, reducing stress on the compressor and other components, and providing a more stable and consistent supply of compressed air.

    5. Energy Efficiency: Air compressor tanks contribute to energy efficiency by reducing the need for the compressor to run continuously. The compressor can fill the tank during periods of low demand and then shut off when the desired pressure is reached. This allows the compressor to operate in shorter cycles, reducing energy consumption and minimizing wear and tear on the compressor motor.

    6. Emergency Air Supply: In the event of a power outage or compressor failure, the stored compressed air in the tank can serve as an emergency air supply. This can provide temporary air for critical operations, allowing time for maintenance or repairs to be carried out without disrupting the overall workflow.

    Overall, air compressor tanks provide storage, pressure regulation, moisture separation, heat dissipation, pressure surge mitigation, energy efficiency, and emergency backup capabilities. They are vital components that enhance the performance, reliability, and longevity of air compressor systems in various industrial, commercial, and personal applications.

    China supplier High Quality for CHINAMFG Engine Air Compressor   air compressor portableChina supplier High Quality for CHINAMFG Engine Air Compressor   air compressor portable
    editor by CX 2024-04-08

    China supplier Original Genuine 61263003040 CHINAMFG Engine Parts CHINAMFG Air Compressor air compressor CHINAMFG freight

    Product Description

     

    HangZhou HangZhou Xun Electromechanical Equipment Co., Ltd., referred to as ‘HangZhou HangZhou Xun,’ is a high-tech enterprise specializing in the development, design, production, and sales of intelligent and environmentally friendly power supply equipment. With the development strategy of ‘China Power, Serving the World,’ the company aims to become the largest modern high-end diesel power equipment maintenance and repair center in the Central Plains region of China, covering an area of 1. We specialize in providing Original Genuine CHINAMFG Air Compressor CHINAMFG Engine Parts, such as the CHINAMFG Engine Filter. Our filters are made of high-quality metal and are suitable for industrial applications, specifically engine oil filtration.
    /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

    Standard Component: Standard Component
    Technics: Casting
    Material: Aluminum
    Type: Air Compressor
    Transport Package: Cardboard Packaging
    Specification: Standard
    Customization:
    Available

    |

    air compressor

    What are the advantages of using an air compressor in construction?

    Using an air compressor in construction offers numerous advantages that contribute to increased efficiency, productivity, and versatility. Here are some key benefits of using air compressors in construction:

    • Powering Pneumatic Tools: Air compressors are commonly used to power a wide range of pneumatic tools on construction sites. Tools such as jackhammers, nail guns, impact wrenches, drills, and sanders can be operated using compressed air. Pneumatic tools are often preferred due to their lightweight, compact design and ability to deliver high torque or impact force.
    • Efficient Operation: Air compressors provide a continuous and reliable source of power for pneumatic tools, allowing for uninterrupted operation without the need for frequent battery changes or recharging. This helps to maintain a smooth workflow and reduces downtime.
    • Portability: Many construction air compressors are designed to be portable, featuring wheels or handles for easy maneuverability on job sites. Portable air compressors can be transported to different areas of the construction site as needed, providing power wherever it is required.
    • Versatility: Air compressors are versatile tools that can be used for various applications in construction. Apart from powering pneumatic tools, they can also be utilized for tasks such as inflating tires, cleaning debris, operating air-operated pumps, and powering air horns.
    • Increased Productivity: The efficient operation and power output of air compressors enable construction workers to complete tasks more quickly and effectively. Pneumatic tools powered by air compressors often offer higher performance and faster operation compared to their electric or manual counterparts.
    • Cost Savings: Air compressors can contribute to cost savings in construction projects. Pneumatic tools powered by air compressors are generally more durable and have longer lifespans compared to electric tools. Additionally, since air compressors use compressed air as their power source, they do not require the purchase or disposal of batteries or fuel, reducing ongoing operational expenses.
    • Reduced Electrocution Risk: Construction sites can be hazardous environments, with the risk of electrocution from electrical tools or equipment. By utilizing air compressors and pneumatic tools, the reliance on electrical power is minimized, reducing the risk of electrocution accidents.

    It is important to select the appropriate air compressor for construction applications based on factors such as required air pressure, volume, portability, and durability. Regular maintenance, including proper lubrication and cleaning, is crucial to ensure the optimal performance and longevity of air compressors in construction settings.

    In summary, the advantages of using air compressors in construction include powering pneumatic tools, efficient operation, portability, versatility, increased productivity, cost savings, and reduced electrocution risk, making them valuable assets on construction sites.

    air compressor

    What are the environmental considerations when using air compressors?

    When using air compressors, there are several environmental considerations to keep in mind. Here’s an in-depth look at some of the key factors:

    Energy Efficiency:

    Energy efficiency is a crucial environmental consideration when using air compressors. Compressing air requires a significant amount of energy, and inefficient compressors can consume excessive power, leading to higher energy consumption and increased greenhouse gas emissions. It is important to choose energy-efficient air compressors that incorporate features such as Variable Speed Drive (VSD) technology and efficient motor design, as they can help minimize energy waste and reduce the carbon footprint.

    Air Leakage:

    Air leakage is a common issue in compressed air systems and can contribute to energy waste and environmental impact. Leaks in the system result in the continuous release of compressed air, requiring the compressor to work harder and consume more energy to maintain the desired pressure. Regular inspection and maintenance of the compressed air system to detect and repair leaks can help reduce air loss and improve overall energy efficiency.

    Noise Pollution:

    Air compressors can generate significant noise levels during operation, which can contribute to noise pollution. Prolonged exposure to high noise levels can have detrimental effects on human health and well-being and can also impact the surrounding environment and wildlife. It is important to consider noise reduction measures such as sound insulation, proper equipment placement, and using quieter compressor models to mitigate the impact of noise pollution.

    Emissions:

    While air compressors do not directly emit pollutants, the electricity or fuel used to power them can have an environmental impact. If the electricity is generated from fossil fuels, the associated emissions from power plants contribute to air pollution and greenhouse gas emissions. Choosing energy sources with lower emissions, such as renewable energy, can help reduce the environmental impact of operating air compressors.

    Proper Waste Management:

    Proper waste management is essential when using air compressors. This includes the appropriate disposal of compressor lubricants, filters, and other maintenance-related materials. It is important to follow local regulations and guidelines for waste disposal to prevent contamination of soil, water, or air and minimize the environmental impact.

    Sustainable Practices:

    Adopting sustainable practices can further reduce the environmental impact of using air compressors. This can include implementing preventive maintenance programs to optimize performance, reducing idle time, and promoting responsible use of compressed air by avoiding overpressurization and optimizing system design.

    By considering these environmental factors and taking appropriate measures, it is possible to minimize the environmental impact associated with the use of air compressors. Choosing energy-efficient models, addressing air leaks, managing waste properly, and adopting sustainable practices can contribute to a more environmentally friendly operation.

    air compressor

    What maintenance is required for air compressors?

    Maintaining air compressors is essential to ensure their optimal performance, longevity, and safe operation. Regular maintenance helps prevent breakdowns, improves efficiency, and reduces the risk of accidents. Here are some key maintenance tasks for air compressors:

    1. Regular Inspection: Perform visual inspections of the air compressor to identify any signs of wear, damage, or leaks. Inspect the compressor, hoses, fittings, and connections for any abnormalities. Pay attention to oil leaks, loose bolts, and worn-out components.

    2. Oil Changes: If your air compressor has an oil lubrication system, regular oil changes are crucial. Follow the manufacturer’s recommendations for the frequency of oil changes and use the recommended oil type. Dirty or degraded oil can impact compressor performance and lead to premature wear.

    3. Air Filter Cleaning or Replacement: Clean or replace the air filter regularly to ensure proper air intake and prevent contaminants from entering the compressor. Clogged or dirty filters can restrict airflow and reduce efficiency.

    4. Drain Moisture: Air compressors produce moisture as a byproduct of the compression process. Accumulated moisture in the tank can lead to rust and corrosion. Drain the moisture regularly from the tank to prevent damage. Some compressors have automatic drains, while others require manual draining.

    5. Belt Inspection and Adjustment: If your compressor has a belt-driven system, inspect the belts for signs of wear, cracks, or tension issues. Adjust or replace the belts as necessary to maintain proper tension and power transmission.

    6. Tank Inspection: Inspect the compressor tank for any signs of corrosion, dents, or structural issues. A damaged tank can be hazardous and should be repaired or replaced promptly.

    7. Valve Maintenance: Check the safety valves, pressure relief valves, and other valves regularly to ensure they are functioning correctly. Test the valves periodically to verify their proper operation.

    8. Motor and Electrical Components: Inspect the motor and electrical components for any signs of damage or overheating. Check electrical connections for tightness and ensure proper grounding.

    9. Keep the Area Clean: Maintain a clean and debris-free area around the compressor. Remove any dirt, dust, or obstructions that can hinder the compressor’s performance or cause overheating.

    10. Follow Manufacturer’s Guidelines: Always refer to the manufacturer’s manual for specific maintenance instructions and recommended service intervals for your air compressor model. They provide valuable information on maintenance tasks, lubrication requirements, and safety precautions.

    Regular maintenance is vital to keep your air compressor in optimal condition and extend its lifespan. It’s also important to note that maintenance requirements may vary depending on the type, size, and usage of the compressor. By following a comprehensive maintenance routine, you can ensure the reliable operation of your air compressor and maximize its efficiency and longevity.

    China supplier Original Genuine 61263003040 CHINAMFG Engine Parts CHINAMFG Air Compressor   air compressor CHINAMFG freightChina supplier Original Genuine 61263003040 CHINAMFG Engine Parts CHINAMFG Air Compressor   air compressor CHINAMFG freight
    editor by CX 2024-04-03

    China supplier High Pressure 16bar Integrated Air Compressor for Laser Cutting Field with Great quality

    Product Description

    Product Description

    Product Introduction

        The Kingair KAPM series of integrated screw air compressors, with a vertebral shaft host, are easy to disassemble. There is no need to equip a gas tank, cold dryer, filter, etc., and no need to take over. One machine is integrated in 1 stop, with large exhaust capacity and energy saving, small footprint and other advantages, it is very popular among users in the laser cutting industry.
        The touch screen display and control all-in-1 machine starts with 1 click and is easy to operate. Permanent magnet frequency conversion control technology VSD, the oil and gas barrel separates the oil in the compressed air, and the precision oil filter filters the oil impurities. Using a high-efficiency format refrigeration dryer and a 4-stage high-efficiency precision filter, the pressure dew point is as low as 2-8°C to ensure pure compressed air. Stainless steel pipelines are post-processed to avoid secondary pollution. Paired with a permanent magnet variable frequency high-efficiency motor to ensure consistent pressure, the high-efficiency axial flow fan has better heat dissipation effect. Special oil and gas barrels and oil separators are used, and the main oil pipe is connected with a flexible pipeline. The operating noise is <70dB, and the shock and noise reduction effect is remarkable.

    Detailed Photos

    Product Parameters

    Model KAPM-30A-16
    Power(KW) 22KW
    Pressure(bar) 16
    Volume(m³/min) 2.0
    Pipe Diameter G1
    Weight(kg) 420
    Dimension(mm) 1800*850*1930(combined type)

     

    Certifications

    Packaging & Shipping

    Installation Instructions

    Company Profile

        ZheJiang Kingair Industrial Co., Ltd., is the core technology solution provider for compressed gas system solutions, with mature operation experience and excellent brand reputation in the 3 major areas : product system, core technology and solutions.

        The company has strong comprehensive strength, the factory is located in Xihu (West Lake) Dis., ZheJiang , covers an area of 30000 square meters, has a strong equipment production capacity. In the course of 20 years of operation and development, we have always adhered to the enterprise spirit of
    “professionalism, innovation, energy saving and service”, deeply implemented the strategic policy of environmental protection and low carbon, and realized the construction of high intelligent and efficient air pressure system industry chain.

        Kingair focuses on R&D, production and trade, and produces air compressor products with stable overall performance, advanced control system, superior, gas environment, reasonable design, higher efficiency and longer service life.

        Eachproduct of the company has passed the IS09000 quality management system certification, European CE, ISO certification, etc., and has established a complete set of mature foreign trade operation system. The products are popular in more than 80 countries and regions in Asia, Europe,Africa and America.

    FAQ

    Q1. Is KINGAIR trading company or manufacturer ?
    A: We are professional manufacturer of screw air compressor, more than 20 years experience.

    Q2. How long is KINGAIR delivery time ?
    A: KINGAIR standard delivery time is 15 working days after confirmed order.For the other non-standard requirements will be discussed case by case.

    Q3. How about your after-sales service?
    A: 1. Provide customers with installation and commissioning online instructions.
    2. Well-trained engineers available to overseas service.
    3. CHINAMFG agents and after service available arrange our engineers to help you training and installation.

    Q4. What is the available voltage KINGAIR compressor?
    A:KINGAIR available voltage include 380v/50hz/3p,400v/50hz/3p,415v/50hz/3p,220v/60hz/3p,440v/60hz/3p,And
    KIGNAIR also supplies the required voltage.

    Q5. Do you have any certificate ?
    A: Yes, according to customer’s market need, we can offer CE certificate, ISO certificate, etc.

    Q6. Do you offer OEM service ?
    A: Yes, both OEM & ODM service can be accepted.

    Q7. Can KINGAIR machines be run in high temperature environment?What is working temperature range?
    A: Yes, KINGAIR machines would run in high temperature environment countries. Such as India, UAE, South Africa, Saudi Arabia, Iraq, Pakistan, etc.

    /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

    After-sales Service: Online Technology Support
    Warranty: 12months
    Lubrication Style: Lubricated
    Cooling System: Air Cooling
    Power Source: AC Power
    Cylinder Position: Horizontal
    Samples:
    US$ 3800/Piece
    1 Piece(Min.Order)

    |
    Request Sample

    Customization:
    Available

    |

    air compressor

    Can air compressors be used for cleaning and blowing dust?

    Yes, air compressors can be effectively used for cleaning and blowing dust in various applications. Here’s how air compressors are utilized for these purposes:

    1. Cleaning Machinery and Equipment:

    Air compressors are commonly used for cleaning machinery and equipment in industries such as manufacturing, automotive, and construction. Compressed air is directed through a nozzle or blowgun attachment to blow away dust, debris, and other contaminants from surfaces, crevices, and hard-to-reach areas. The high-pressure air effectively dislodges and removes accumulated dust, helping to maintain equipment performance and cleanliness.

    2. Dusting Surfaces:

    Air compressors are also employed for dusting surfaces in various settings, including homes, offices, and workshops. The compressed air can be used to blow dust off furniture, shelves, electronic equipment, and other objects. It provides a quick and efficient method of dusting, especially for intricate or delicate items where traditional dusting methods may be challenging.

    3. Cleaning HVAC Systems:

    Air compressors are utilized for cleaning HVAC (Heating, Ventilation, and Air Conditioning) systems. The compressed air can be used to blow dust, dirt, and debris from air ducts, vents, and cooling coils. This helps improve the efficiency and air quality of HVAC systems, preventing the buildup of contaminants that can affect indoor air quality.

    4. Blowing Dust in Workshops:

    In workshops and garages, air compressors are often used to blow dust and debris from workbenches, power tools, and work areas. Compressed air is directed to blow away loose particles and maintain a clean and safe work environment. This is particularly useful in woodworking, metalworking, and other trades where dust and debris can accumulate during the manufacturing or fabrication processes.

    5. Cleaning Electronics and Computer Equipment:

    Air compressors are employed for cleaning electronics and computer equipment. The compressed air is used to blow dust and debris from keyboards, computer cases, circuit boards, and other electronic components. It helps in preventing overheating and maintaining the proper functioning of sensitive electronic devices.

    6. Industrial Cleaning Applications:

    Air compressors find extensive use in industrial cleaning applications. They are employed in industrial settings, such as factories and warehouses, for cleaning large surfaces, production lines, and equipment. Compressed air is directed through specialized cleaning attachments or air-operated cleaning systems to remove dust, dirt, and contaminants efficiently.

    When using air compressors for cleaning and blowing dust, it is important to follow safety precautions and guidelines. The high-pressure air can cause injury if directed towards the body or sensitive equipment. It is advisable to wear appropriate personal protective equipment, such as safety glasses and gloves, and ensure that the air pressure is regulated to prevent excessive force.

    Overall, air compressors provide a versatile and effective solution for cleaning and blowing dust in various applications, offering a convenient alternative to traditional cleaning methods.

    air compressor

    What is the role of air compressors in manufacturing and industrial processes?

    Air compressors play a crucial role in various manufacturing and industrial processes, providing a reliable source of compressed air that powers a wide range of equipment and tools. Here are some key roles of air compressors in manufacturing and industrial settings:

    1. Pneumatic Tools and Equipment:

    Air compressors power a wide range of pneumatic tools and equipment used in manufacturing processes. These tools include impact wrenches, air drills, sanders, grinders, nail guns, and spray guns. Compressed air provides the necessary force and energy for these tools, enabling efficient and precise operations.

    2. Automation and Control Systems:

    Compressed air is used in automation and control systems within manufacturing facilities. Pneumatic actuators and valves use compressed air to control the movement of machinery and components. These systems are widely used in assembly lines, packaging operations, and material handling processes.

    3. Air Blowing and Cleaning:

    Compressed air is employed for blowing and cleaning applications in manufacturing and industrial processes. Air blowguns and air nozzles are used to remove debris, dust, and contaminants from surfaces, machinery, and products. Compressed air is also used for drying, cooling, and purging operations.

    4. Air Separation and Gas Generation:

    Air compressors are used in air separation plants to generate industrial gases such as nitrogen, oxygen, and argon. These gases are essential for various industrial processes, including metal fabrication, chemical production, and food packaging.

    5. HVAC Systems:

    Compressed air is utilized in heating, ventilation, and air conditioning (HVAC) systems. It powers pneumatic actuators for damper control, pneumatic controls for pressure regulation, and pneumatic valves for flow control in HVAC applications.

    6. Air Compression for Storage and Transport:

    Compressed air is used for storage and transport purposes in manufacturing and industrial settings. It is often used to pressurize storage tanks or containers that hold gases or liquids. Compressed air also facilitates the transfer of materials through pipelines and pneumatic conveying systems.

    7. Process Instrumentation:

    Compressed air is utilized in process instrumentation and control systems. It powers pneumatic instruments such as pressure gauges, flow meters, and control valves. These instruments play a critical role in monitoring and regulating various parameters in industrial processes.

    8. Material Handling and Pneumatic Conveying:

    In manufacturing and industrial facilities, compressed air is used for material handling and pneumatic conveying systems. It enables the movement of bulk materials such as powders, granules, and pellets through pipelines, facilitating efficient and controlled material transfer.

    Overall, air compressors are vital components in manufacturing and industrial processes, providing a versatile and efficient source of power for a wide range of applications. The specific role of air compressors may vary depending on the industry, process requirements, and operational needs.

    air compressor

    How do oil-lubricated and oil-free air compressors differ?

    Oil-lubricated and oil-free air compressors differ in terms of their lubrication systems and the presence of oil in their operation. Here are the key differences:

    Oil-Lubricated Air Compressors:

    1. Lubrication: Oil-lubricated air compressors use oil for lubricating the moving parts, such as pistons, cylinders, and bearings. The oil forms a protective film that reduces friction and wear, enhancing the compressor’s efficiency and lifespan.

    2. Performance: Oil-lubricated compressors are known for their smooth and quiet operation. The oil lubrication helps reduce noise levels and vibration, resulting in a more comfortable working environment.

    3. Maintenance: These compressors require regular oil changes and maintenance to ensure the proper functioning of the lubrication system. The oil filter may need replacement, and the oil level should be regularly checked and topped up.

    4. Applications: Oil-lubricated compressors are commonly used in applications that demand high air quality and continuous operation, such as industrial settings, workshops, and manufacturing facilities.

    Oil-Free Air Compressors:

    1. Lubrication: Oil-free air compressors do not use oil for lubrication. Instead, they utilize alternative materials, such as specialized coatings, self-lubricating materials, or water-based lubricants, to reduce friction and wear.

    2. Performance: Oil-free compressors generally have a higher airflow capacity, making them suitable for applications where a large volume of compressed air is required. However, they may produce slightly more noise and vibration compared to oil-lubricated compressors.

    3. Maintenance: Oil-free compressors typically require less maintenance compared to oil-lubricated ones. They do not need regular oil changes or oil filter replacements. However, it is still important to perform routine maintenance tasks such as air filter cleaning or replacement.

    4. Applications: Oil-free compressors are commonly used in applications where air quality is crucial, such as medical and dental facilities, laboratories, electronics manufacturing, and painting applications. They are also favored for portable and consumer-grade compressors.

    When selecting between oil-lubricated and oil-free air compressors, consider the specific requirements of your application, including air quality, noise levels, maintenance needs, and expected usage. It’s important to follow the manufacturer’s recommendations for maintenance and lubrication to ensure the optimal performance and longevity of the air compressor.

    China supplier High Pressure 16bar Integrated Air Compressor for Laser Cutting Field   with Great qualityChina supplier High Pressure 16bar Integrated Air Compressor for Laser Cutting Field   with Great quality
    editor by CX 2024-03-12

    China supplier SDP 350E Popular Size  Portable Screw Air Compressor OEM Manufacture Direct Sale small air compressor

    Product Description

    The machine can meet the demands of overloading use and stands up to the most severe filed environment. Meanwhile, it also can reduce fuel consumption,which greatly cut down the operation cost. Subsided  structure to install the oil tank, placed around each one, Increase oil reserves, make the add oil time interval longer, the weight on both sides are  balanced. Tank not in the case, make the space more and not only bring convenience to maintenance service, noise is reduced accordingly, but also giving the customer a good value feeling.
    Advantage:
    1. High Reliability
    Less compressor parts, without wearing parts, so it is reliable, long life, overhaul interval is up to 40 to 80 thousand hours.
    2. Easy Operation and Maintenance
    A high degree of automation, the operator does not have to go through a long period of professional training, can achieve unattended operation.
    3. The Power Balance is Good
    There is no unbalanced inertia force, can smoothly high-speed operation, can achieve no basic operation, especially suitable for portable compressors, small size, light weight, small footprint.
    4. Strong Adaptability
    With a mandatory gas transmission characteristics, the volume flow is almost free from the impact of exhaust pressure, in a wide range of speed to maintain high efficiency.

    Our SDP Series:
    Product Accessories:

    1.Brand Screw Host
    Large rotors, low rpm,long life span
    High efficiency,low noise,low vibration,high reliability
    Bearing life over 100,000 hours
    Little leakage triangle,low power/airflow ratio
    Less wearing parts,low maintenance cost
    2.Motor
    High efficiency air-cooling totally enclosed motor
    Large starting torque
    Low noise,better structure
    Original imported bearing
    F grade insulation, IP 55 protection level
    Low rpm

    3.Brand Intake Valve Assembie
    Non-load starting,butterfly inlet comtrolling valve
    0~100% stepless volume regulation,aluminium alloy unibody casing
    With Non-return value for heavy load,piston mover
    Non-return value close under urgent stop or power failure

    4.Air Filter
    Air filter from Mann Hummel Germany
    Dust removal 99.9%,filtering fineness 3 μm
    Ensuring the clean air for inlet
    Prolonging the life span of air system,large size,over 3000 hours

    5.Oil System
    Oil Filter from Mann Hummel Germany
    Reliably removing the dust in oil
    Oil fineness less then 0.1 μm
    Ensuring the clearness and lubrication of oil system,good cooling function
    Application Fields:

    Using Site Pictures:

    Our service: 

    1. Pre-sale service: 
    Act as a good adviser and assistant of clients enable them to get rich and generous returns on their investments. 1. Select equipment model. 2. Design and manufacture products according to client’s special requirement; 3. Train technical personnel for clients. 

    2. Services during the Sale: 

    1. Pre-check and accept products ahead of delivery. 
    2. Help clients to draft solving plans. 

    3. After-sale Services: 

    Provide considerate services to minimize clients’ worries. 
    1. Complete After-sales service, professional engineers available to service machinery at home or oversea. 
    2.24 hours technical support by e-mail. 
    3. Other essential technological service. 
    Contact details:
    Company name:HangZhou CHINAMFG Compressor Co.,Ltd
    Company address:No.498 YouYi north street,Xihu (West Lake) Dis. district,HangZhou city.
    Website:http://compscompressor       
     
      /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

    After-sales Service: Online Service
    Warranty: One Year Warranty
    Lubrication Style: Lubricated
    Customization:
    Available

    |

    .shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

    Shipping Cost:

    Estimated freight per unit.







    about shipping cost and estimated delivery time.
    Payment Method:







     

    Initial Payment



    Full Payment
    Currency: US$
    Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

    air compressor

    How are air compressors employed in the petrochemical industry?

    Air compressors play a vital role in the petrochemical industry, where they are employed for various applications that require compressed air. The petrochemical industry encompasses the production of chemicals and products derived from petroleum and natural gas. Here’s an overview of how air compressors are utilized in the petrochemical industry:

    1. Instrumentation and Control Systems:

    Air compressors are used to power pneumatic instrumentation and control systems in petrochemical plants. These systems rely on compressed air to operate control valves, actuators, and other pneumatic devices that regulate processes such as flow control, pressure control, and temperature control. Compressed air provides a reliable and clean source of energy for these critical control mechanisms.

    2. Pneumatic Tools and Equipment:

    Petrochemical plants often utilize pneumatic tools and equipment for various tasks such as maintenance, repair, and construction activities. Air compressors supply the necessary compressed air to power these tools, including pneumatic drills, impact wrenches, grinders, sanders, and painting equipment. The versatility and convenience of compressed air make it an ideal energy source for a wide range of pneumatic tools used in the industry.

    3. Process Air and Gas Supply:

    Petrochemical processes often require a supply of compressed air and gases for specific applications. Air compressors are employed to generate compressed air for processes such as oxidation, combustion, and aeration. They may also be used to compress gases like nitrogen, hydrogen, and oxygen, which are utilized in various petrochemical reactions and treatment processes.

    4. Cooling and Ventilation:

    Petrochemical plants require adequate cooling and ventilation systems to maintain optimal operating conditions and ensure the safety of personnel. Air compressors are used to power cooling fans, blowers, and air circulation systems that help maintain the desired temperature, remove heat generated by equipment, and provide ventilation in critical areas.

    5. Nitrogen Generation:

    Nitrogen is widely used in the petrochemical industry for applications such as blanketing, purging, and inerting. Air compressors are utilized in nitrogen generation systems, where they compress atmospheric air, which is then passed through a nitrogen separation process to produce high-purity nitrogen gas. This nitrogen is used for various purposes, including preventing the formation of explosive mixtures, protecting sensitive equipment, and maintaining the integrity of stored products.

    6. Instrument Air:

    Instrument air is essential for operating pneumatic instruments, analyzers, and control devices throughout the petrochemical plant. Air compressors supply compressed air that is treated and conditioned to meet the stringent requirements of instrument air quality standards. Instrument air is used for tasks such as pneumatic conveying, pneumatic actuators, and calibration of instruments.

    By employing air compressors in the petrochemical industry, operators can ensure reliable and efficient operation of pneumatic systems, power various tools and equipment, support critical processes, and maintain safe and controlled environments.

    air compressor

    How do you troubleshoot common air compressor problems?

    Troubleshooting common air compressor problems can help identify and resolve issues that may affect the performance and functionality of the compressor. Here are some steps to troubleshoot common air compressor problems:

    1. No Power:

    • Check the power source and ensure the compressor is properly plugged in.
    • Inspect the circuit breaker or fuse box to ensure it hasn’t tripped or blown.
    • Verify that the compressor’s power switch or control panel is turned on.

    2. Low Air Pressure:

    • Check the air pressure gauge on the compressor. If the pressure is below the desired level, the compressor might not be building up enough pressure.
    • Inspect for air leaks in the system. Leaks can cause a drop in pressure. Listen for hissing sounds or use a soapy water solution to identify the location of leaks.
    • Ensure the compressor’s intake filter is clean and not clogged, as this can restrict airflow and reduce pressure.

    3. Excessive Noise or Vibration:

    • Inspect the compressor’s mounting and foundation to ensure it is secure and stable. Loose mounts can cause excessive noise and vibration.
    • Check for loose or damaged components, such as belts, pulleys, or motor mounts. Tighten or replace as necessary.
    • Verify that the compressor’s cooling system, such as the fan or fins, is clean and free from obstructions. Overheating can lead to increased noise and vibration.

    4. Air Leaks:

    • Inspect all connections, valves, fittings, and hoses for leaks. Tighten or replace any loose or damaged components.
    • Apply a soapy water solution to suspected areas and look for bubbles. Bubbles indicate air leaks.
    • Consider using thread sealant or Teflon tape on threaded connections to ensure a proper seal.

    5. Excessive Moisture in Compressed Air:

    • Check the compressor’s drain valve and ensure it is functioning properly. Open the valve to release any accumulated moisture.
    • Inspect and clean the compressor’s moisture separator or air dryer, if equipped.
    • Consider installing additional filtration or drying equipment to remove moisture from the compressed air system.

    6. Motor Overheating:

    • Ensure the compressor’s cooling system is clean and unobstructed.
    • Check the motor’s air intake vents and clean any dust or debris that may be blocking airflow.
    • Verify that the compressor is not being operated in an excessively hot environment.
    • Check the motor’s lubrication levels and ensure they are within the manufacturer’s recommended range.
    • Consider using a thermal overload protector to prevent the motor from overheating.

    If troubleshooting these common problems does not resolve the issue, it may be necessary to consult the manufacturer’s manual or seek assistance from a qualified technician. Regular maintenance, such as cleaning, lubrication, and inspection, can also help prevent common problems and ensure the optimal performance of the air compressor.

    air compressor

    What are the safety considerations when operating an air compressor?

    Operating an air compressor requires careful attention to safety to prevent accidents, injuries, and equipment damage. Here are some important safety considerations to keep in mind:

    1. Read the Manual: Before operating an air compressor, thoroughly read and understand the manufacturer’s instruction manual. Familiarize yourself with the specific safety guidelines, recommended operating procedures, and any specific precautions or warnings provided by the manufacturer.

    2. Proper Ventilation: Ensure that the area where the air compressor is operated has adequate ventilation. Compressed air can produce high levels of heat and exhaust gases. Good ventilation helps dissipate heat, prevent the buildup of fumes, and maintain a safe working environment.

    3. Personal Protective Equipment (PPE): Always wear appropriate personal protective equipment, including safety glasses or goggles, hearing protection, and non-slip footwear. Depending on the task, additional PPE such as gloves, a dust mask, or a face shield may be necessary to protect against specific hazards.

    4. Pressure Relief: Air compressors should be equipped with pressure relief valves or devices to prevent overpressurization. Ensure that these safety features are in place and functioning correctly. Regularly inspect and test the pressure relief mechanism to ensure its effectiveness.

    5. Secure Connections: Use proper fittings, hoses, and couplings to ensure secure connections between the air compressor, air tools, and accessories. Inspect all connections before operation to avoid leaks or sudden hose disconnections, which can cause injuries or damage.

    6. Inspect and Maintain: Regularly inspect the air compressor for any signs of damage, wear, or leaks. Ensure that all components, including hoses, fittings, and safety devices, are in good working condition. Follow the manufacturer’s recommended maintenance schedule to keep the compressor in optimal shape.

    7. Electrical Safety: If the air compressor is electric-powered, take appropriate electrical safety precautions. Use grounded outlets and avoid using extension cords unless approved for the compressor’s power requirements. Protect electrical connections from moisture and avoid operating the compressor in wet or damp environments.

    8. Safe Start-Up and Shut-Down: Properly start and shut down the air compressor following the manufacturer’s instructions. Ensure that all air valves are closed before starting the compressor and release all pressure before performing maintenance or repairs.

    9. Training and Competence: Ensure that operators are adequately trained and competent in using the air compressor and associated tools. Provide training on safe operating procedures, hazard identification, and emergency response protocols.

    10. Emergency Preparedness: Have a clear understanding of emergency procedures and how to respond to potential accidents or malfunctions. Know the location of emergency shut-off valves, fire extinguishers, and first aid kits.

    By adhering to these safety considerations and implementing proper safety practices, the risk of accidents and injuries associated with operating an air compressor can be significantly reduced. Prioritizing safety promotes a secure and productive working environment.

    China supplier SDP 350E Popular Size  Portable Screw Air Compressor OEM Manufacture Direct Sale   small air compressor China supplier SDP 350E Popular Size  Portable Screw Air Compressor OEM Manufacture Direct Sale   small air compressor
    editor by CX 2024-03-10

    China supplier Italian Belt-Type Air Compressor air compressor oil

    Product Description

                                                                                                                Italian Belt Type Air Compressor
    Model  SG-L2090T-230L
    Electric Motor  4000W/5.5HP
    Voltage  380V
    Frequency  50Hz
    Tank Size  450*1200*3.5MM
    Pressure  12.5BAR
    Capacity  230L
    Speed  920RPM
    Cylinder x Qty.  Ø90mm*1pcs/55mm*1pcs

    Company Info.

    Company Profile

      Business Type: Manufacturer/Factory & Trading Company
      Main Products: Direct Driven Air Compressor , Oil Free Series Compressor , Belt Driven Air Compressor , 
     
      Number of Employees: 100
      Year of Establishment: 2008-03-16
      Management System Certification: ISO9001:2015
      OEM/ODM Availability: Yes

    Shengang, an expert in high-end machinery and equipment manufacturing, is located in HangZhou, ZHangZhoug. It is a large-scale manufacturing enterprise with a modern factory building of 50,000 square meters, a product research and development center and an international management system.

    We focus on the R&D and manufacturing of various types of motors, air compressors and cleaning equipment. After more than 30 years of brand accumulation, Kamioka products have won a number of utility model patents and invention patents. The products sell well all over the world and are well received by the majority of supporting manufacturers. trust and support.

    The company adheres to the purpose of “pursuing perfect quality and meeting customer needs”. The best products, the strictest quality control, the most reasonable prices and the most honest services are Kamiokande’s commitment to you. We sincerely welcome all Chinese and foreign partners to cooperate and work together for a CHINAMFG situation and move towards a better future!

    Main Feature:
    1. Standard stroke cylinder pump head, smooth operation and high production efficiency.
    2. Thickened aluminum cast piston connecting rod, high strength, wear resistance, high temperature resistance and other characteristics.
    3. Full copper wire motor, higher working efficiency, reliable operation and CHINAMFG structure.
    4. Thickened hot-rolled steel plate gas storage tank, high strength and high pressure resistance thickness.
    5. Accurate original pressure gauge, standard CHINAMFG display is accurate, safe and stable work.
    6. Suction and exhaust valve, special valve cylinder, not afraid of high temperature.
    7. Brand bearings, high quality bearings have long service life.
    8. Thickened belt, the belt is tough and can mitigate impact, runs smoothly and has low operating noise.
    9. Magnetic protector: Provide protective measures when the motor encounters overcurrent, overload, phase loss, short circuit, leakage, and imbalance.
    10. Large capacity fuel tank design, low fuel consumption operation.

    Certificates:

    1.We have already got CE certificates for air compressor.       

    2.ISO9001 certificate for the factory.

    We have invention patents for air compressors and high pressure washers.

    We have air compressor energy efficiency labels.
    Packing:

    Outer packing is honey-comb carton with belts,inner packing is a transparent bag.We could accept customers special request,such as:print brand,specification,good’s picture.

    Frequency Asked Question:

    1.Are you the manufacturer or trading company?
    We are the manufacturer.

    2.Where is your factory?
    It is located in HangZhou City,ZHangZhoug Province,China.

    3.What’s the terms of trade?
    FOB,CFR,CIF or EXW are all acceptable.

    4.What’s the terms of payment?
    T/T,L/C at sight or cash.

    5.What’s the lead time?
    About 30 days after receiving the deposit on our bank account.

    6.Do you accept sample order?
    Yes,we accept.

    7.What about the cost of sample?
     You have to pay the freight charge.But the cost of product could be refundable,if you will purchase 1×40’HQ container in the future.

      /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

    After-sales Service: 1 Year
    Warranty: 1 Year
    Lubrication Style: Lubricated
    Cooling System: Air Cooling
    Cylinder Arrangement: Duplex Arrangement
    Cylinder Position: Vertical
    Samples:
    US$ 356/Piece
    1 Piece(Min.Order)

    |
    Request Sample

    Customization:
    Available

    |

    air compressor

    Can air compressors be used for painting and sandblasting?

    Yes, air compressors can be used for both painting and sandblasting applications. Here’s a closer look at how air compressors are utilized for painting and sandblasting:

    Painting:

    Air compressors are commonly used in painting processes, especially in automotive, industrial, and construction applications. Here’s how they are involved:

    • Spray Guns: Air compressors power spray guns used for applying paint coatings. The compressed air atomizes the paint, creating a fine mist that can be evenly sprayed onto surfaces. The pressure and volume of the compressed air impact the spray pattern, coverage, and overall finish quality.
    • Paint Mixers and Agitators: Compressed air is often used to power mixers and agitators that ensure proper blending of paint components. These devices use the compressed air to stir or circulate the paint, preventing settling and maintaining a consistent mixture.
    • Airbrushing: Air compressors are essential for airbrushing techniques, which require precise control over airflow and pressure. Airbrushes are commonly used in artistic applications, such as illustrations, murals, and fine detailing work.

    Sandblasting:

    Air compressors play a crucial role in sandblasting operations, which involve propelling abrasive materials at high velocity to clean, etch, or prepare surfaces. Here’s how air compressors are used in sandblasting:

    • Blasting Cabinets: Air compressors power blasting cabinets or booths, which are enclosed spaces where the sandblasting process takes place. The compressed air propels the abrasive media, such as sand or grit, through a nozzle or gun, creating a forceful stream that impacts the surface being treated.
    • Abrasive Blasting Pots: Air compressors supply air to abrasive blasting pots or tanks that store and pressurize the abrasive media. The compressed air from the compressor enters the pot, pressurizing it and allowing for a controlled release of the abrasive material during the sandblasting process.
    • Air Dryers and Filters: In sandblasting applications, it is crucial to have clean, dry air to prevent moisture and contaminants from affecting the abrasive blasting process and the quality of the surface being treated. Air compressors may be equipped with air dryers and filters to remove moisture, oil, and impurities from the compressed air.

    When using air compressors for painting or sandblasting, it is important to consider factors such as the compressor’s pressure and volume output, the specific requirements of the application, and the type of tools or equipment being used. Consult the manufacturer’s guidelines and recommendations to ensure the air compressor is suitable for the intended painting or sandblasting tasks.

    Proper safety measures, such as wearing protective gear and following established protocols, should always be followed when working with air compressors for painting and sandblasting applications.

    air compressor

    How are air compressors used in refrigeration and HVAC systems?

    Air compressors play a vital role in refrigeration and HVAC (Heating, Ventilation, and Air Conditioning) systems, providing the necessary compression of refrigerant gases and facilitating the heat transfer process. Here are the key ways in which air compressors are used in refrigeration and HVAC systems:

    1. Refrigerant Compression:

    In refrigeration systems, air compressors are used to compress the refrigerant gas, raising its pressure and temperature. This compressed gas then moves through the system, where it undergoes phase changes and heat exchange to enable cooling or heating. The compressor is the heart of the refrigeration cycle, as it pressurizes and circulates the refrigerant.

    2. Refrigeration Cycle:

    The compression of refrigerant gas by the air compressor is an essential step in the refrigeration cycle. After compression, the high-pressure, high-temperature gas flows to the condenser, where it releases heat and condenses into a liquid. The liquid refrigerant then passes through an expansion valve or device, which reduces its pressure and temperature. This low-pressure, low-temperature refrigerant then enters the evaporator, absorbing heat from the surrounding environment and evaporating back into a gas. The cycle continues as the gas returns to the compressor for re-compression.

    3. HVAC Cooling and Heating:

    In HVAC systems, air compressors are used to facilitate cooling and heating processes. The compressor compresses the refrigerant gas, which allows it to absorb heat from the indoor environment in the cooling mode. The compressed gas releases heat in the outdoor condenser unit and then circulates back to the compressor to repeat the cycle. In the heating mode, the compressor reverses the refrigeration cycle, absorbing heat from the outdoor air or ground source and transferring it indoors.

    4. Air Conditioning:

    Air compressors are an integral part of air conditioning systems, which are a subset of HVAC systems. Compressed refrigerant gases are used to cool and dehumidify the air in residential, commercial, and industrial buildings. The compressor pressurizes the refrigerant, initiating the cooling cycle that removes heat from the indoor air and releases it outside.

    5. Compressor Types:

    Refrigeration and HVAC systems utilize different types of air compressors. Reciprocating compressors, rotary screw compressors, and scroll compressors are commonly used in these applications. The selection of the compressor type depends on factors such as system size, capacity requirements, efficiency, and application-specific considerations.

    6. Energy Efficiency:

    Efficient operation of air compressors is crucial for refrigeration and HVAC systems. Energy-efficient compressors help minimize power consumption and reduce operating costs. Additionally, proper compressor sizing and system design contribute to the overall energy efficiency of refrigeration and HVAC systems.

    By effectively compressing refrigerant gases and facilitating the heat transfer process, air compressors enable the cooling and heating functions in refrigeration and HVAC systems, ensuring comfortable indoor environments and efficient temperature control.

    air compressor

    What is the difference between a piston and rotary screw compressor?

    Piston compressors and rotary screw compressors are two common types of air compressors with distinct differences in their design and operation. Here’s a detailed explanation of the differences between these two compressor types:

    1. Operating Principle:

    • Piston Compressors: Piston compressors, also known as reciprocating compressors, use one or more pistons driven by a crankshaft to compress air. The piston moves up and down within a cylinder, creating a vacuum during the intake stroke and compressing the air during the compression stroke.
    • Rotary Screw Compressors: Rotary screw compressors utilize two intermeshing screws (rotors) to compress air. As the male and female screws rotate, the air is trapped between them and gradually compressed as it moves along the screw threads.

    2. Compression Method:

    • Piston Compressors: Piston compressors achieve compression through a positive displacement process. The air is drawn into the cylinder and compressed as the piston moves back and forth. The compression is intermittent, occurring in discrete cycles.
    • Rotary Screw Compressors: Rotary screw compressors also employ a positive displacement method. The compression is continuous as the rotating screws create a continuous flow of air and compress it gradually as it moves along the screw threads.

    3. Efficiency:

    • Piston Compressors: Piston compressors are known for their high efficiency at lower flow rates and higher pressures. They are well-suited for applications that require intermittent or variable air demand.
    • Rotary Screw Compressors: Rotary screw compressors are highly efficient for continuous operation and are designed to handle higher flow rates. They are often used in applications with a constant or steady air demand.

    4. Noise Level:

    • Piston Compressors: Piston compressors tend to generate more noise during operation due to the reciprocating motion of the pistons and valves.
    • Rotary Screw Compressors: Rotary screw compressors are generally quieter in operation compared to piston compressors. The smooth rotation of the screws contributes to reduced noise levels.

    5. Maintenance:

    • Piston Compressors: Piston compressors typically require more frequent maintenance due to the higher number of moving parts, such as pistons, valves, and rings.
    • Rotary Screw Compressors: Rotary screw compressors have fewer moving parts, resulting in lower maintenance requirements. They often have longer service intervals and can operate continuously for extended periods without significant maintenance.

    6. Size and Portability:

    • Piston Compressors: Piston compressors are available in both smaller portable models and larger stationary units. Portable piston compressors are commonly used in construction, automotive, and DIY applications.
    • Rotary Screw Compressors: Rotary screw compressors are typically larger and more suitable for stationary installations in industrial and commercial settings. They are less commonly used in portable applications.

    These are some of the key differences between piston compressors and rotary screw compressors. The choice between the two depends on factors such as required flow rate, pressure, duty cycle, efficiency, noise level, maintenance needs, and specific application requirements.

    China supplier Italian Belt-Type Air Compressor   air compressor oilChina supplier Italian Belt-Type Air Compressor   air compressor oil
    editor by CX 2024-02-07